Zander Liebig Hive

The muzzle prevents the hornets from directly approaching the flight hole. Most bees are attacked by the hornets at the flight hole, making them easy victims. Experience shows that the hornet has to sit down first after passing through the muzzle before it can enter.Behind the grid, the bees can get to the flight hole from above. We recommend additional protection with entrance block.The muzzle should be attached to the hive in front of the flight hole with a strap (not included) and remain there from the end of August to about mid/end of November (depending on the weather).It is essential that the Varroa slider remains inserted, so that the hornets do not disturb the colony from below.The entrance block inserted from above should only be used after a few days. Once the bees get used to flying in from above, the flight hole can be narrowed with it.Additionally required: Zander Liebig entrance block against Asian Hornet, Item no. XXXWeight: 1.15 kg

Prevents the penetration of mice and the Asian Hornet (Vespa Velutina).The block should be attached to the flight hole from the end of August until the beginning of the flight season (February/March - depending on the region and weather).For Dadant floor 6005015Dimensions: 380 x 28 x 28 mmWeight: 0.1 kg

The queen excluder has a wooden frame. It only allows the bees to enter the super.Material: wooden frame beech wood / grid galvanizedDimensions: 420 x 520 mm (grid dimensions 395 x 480 mm)Weight: 1.3 kg

The floor is equipped with a continuous grille for optimal air circulation, a Nicot insert board for reliable Varroa control and a Nicot entrance block (brown).A fix mounted adapter made of wood ensures compatibility with our Liebig broad bodies.Material: plastic / woodDimensions: 420 x 520 mm (wooden adapter)Weight: 2.4 kg

The Nicot NCC feeder is suitable for solid and liquid feeding, as well as for feeding two colonies in one hive. The central ascent exposes the view of the colony strength. It is also possible to add a queen cell or a queen in a cage without opening the hive. The capacity of the two food bowls is 3.5 litres each. The smooth, pore-free surface makes cleaning easier.Illustration similar!In the picture the plugs and reduction gates are not visibleConsisting of:1 Nicot feeder NCC2 closure plugs4 Inlet reductions gatesMaterial: food grade, recyclable plasticDimensions: 430 x 510 mmWeight: 1.5 kg

The plastic sliding board allows reliable control of varroa deposition. The smooth surface is particularly easy to maintain.Material: plastic (food safe, dishwasher safe)Weight: 0.4 kg

Zander Liebig Insulation board for inner cover.The insulation board is made of cellulose to fit the inner cover. It serves the optimal insulation of the prey against strong sunlight in summer as well as against cold in winter.Material: celluloseMatching items: Zander Liebig inner cover 6005012Weight: 0.8 kg

The shallow super has aluminium rails and space for 10 frames.2 rails at the bottom of the super give stability and make sure that it will not slip-off.The corner joints of the frame are in groove and spring, glued and screwed.Material: Weymouth pineMeasurements: 420 x 520 mm, Height 168 mmWeight: 2.9 kg

The Zander-Dadant Brood body has aluminium rails and space for 10 frames.2 rails at the bottom of the body give stability and make sure that it will not slip-off.The corner joints of the frame are in groove and spring, glued and screwed.Material: Weymouth pineMeasurements: 420 x 520 mm, Height 295 mmWeight: 4.6 kg

The inner cover is made of a 6 mm thick waterproof glued plywood board and is provided with a wooden frame. For insulation we recommend using the insulation board (not included!). Material: spruce wood / plywood board B-quality (may have minor material defects - this does not affect functionality)Dimensions inner cover: 420 x 520 mmMatching item:Zander Liebig Insulation board, item no. 6005013Weight: 1.1 kg

The floor is equipped with stainless steel expanded metal, which ensures good air circulation as well as reliable varroa control (floor insert not included!).Material: spruce woodWeight: 3.8 kg

Zander Liebig Beute (complete) consists of:• Metal cover • Inner coverl • Insulation board• 3 x Zander Liebig Standard super 229 mm high • Floor with Stainless steel exxpanded metal• Floor insert for varroa control• Entrance block - turnable• Material: Spruce wood, Super: Weymouth pine• Measurements: 420 x 520 mm, 20 mm thick• Weight: 20.4 kg- Frames not included, not painted, suitable for 10 Zander framesChargable weight: 25 kg

The standard super has aluminium rails and space for 10 frames.2 rails at the bottom of the super give stability and make sure that it will not slip-off.The corner joints of the frame are in groove and spring, glued and screwed.Material: Weymouth pineMeasurements: 420 x 520 mm, Height 229 mmWeight: 4.2 kg

The inner cover is made of a 6 mm thick waterproof glued plywood board and is provided with a wooden frame. There are 2 small bee escapes (Ø 115 mm) incorporated. These allow the convenient removal of the largely bee-free honeycombs for honey harvesting. In addition, 2 blind lids are included. They can be inserted into the cut-outs after the honey harvest to use the inner lid as usual.Material: spruce wood / plywood board B-quality (may have minor material defects - this does not affect functionality)Bee escapes: Plastic; Dimensions Ø 115 mmDimensions inner cover: 420 x 520 mmWeight: 1. 3 kg

The metalcover is put directly over the inner lid and serves as weather protection. This cover is galvanized and spot welded at the corners.Please note that this cover does not fit over the outer wooden cover and is not suitable for treatment with formic acid.Material: galvanized sheet metalDimensions: (inside) 435 x 530 mm, Height 100 mmWeight: 1.6 kg

Material: spruce woodWeight: 0.1 kg