Beehive equipment

Dark grey plastic mesh.Price per m.• mesh size: 3 mm• rolls height: 100 cm• resistant, stable and frost-resistant• Material: HDPE

Bee escape with two annular channel, Ø 115 mm, material plastic

Click here for the product video: https://www.youtube.com/shorts/oTsszidevcE • Strap width 3 cm• Strap length 3.5 m• very stable design, anchor belt• sufficient for magazines up to 4 frames

MW 6.3 mm. Castors height 60 cm per meter.

out of stainless steel

To lay between hive cover and top super to prevent cover from sticking to the frames

Stainless steel wire mesh by the metre. Price per meter. - Mesh size: 2. 5 mm - Wire thickness: 0. 5 mm - Roll height: 48. 5 cm

The diffusion film is an element that improves the climatic conditions within the hive.- Allows moisture to be dissipated- Stable and durable- Easy to remove- Improved control: The crystal-clear properties also make it easier to observe and handle in the beekeeping business.The film is inserted in such a way that there is a minimum gap (0.5–1 mm) between thefoil and edges to allow additional diffusion upwards.It was developed at the University of Innsbruck to strike a balance betweenmoisture management and thermal insulation.The film can be combined with other innovative materials such as reflective fleeces.Roll width: 500 mm

The BeeVital hornet trap is highly selective. Only hornets remain trapped! Insects, bees and others can easily exit through the small holes at the bottom or sides of the trap. The insects are never in contact with the attractant (important for the sanitary aspect depending on the attractant). The hornet stay alive for a certain time and attract other hornets with their pheromones !The hornets attracted by the attractant follow the light in the trap and remain in the collection containers.Please note that when using the trap, the local species protection regulations applicable in the region must be observed. If necessary, the trap must be checked daily for bycatch and, if present, this must be released in accordance with the regulations applicable in the region.The VelutinaTrap was made to capture the invasive species vespa velutina, while allowing other insects and bees to exit without difficulty.Efficient: Hornets confined in the trap emit pheromones, luring additional hornets, enhancing the trap's effectiveness.Hygienic: Insects never come into contact with the attractant, ensuring a clean and sanitary trapping process.When to use:- For the capture of fertilized hornet queens (foundresses), very early in spring, in temperate regions already in mid-February.- Since the trap is highly selective, you can leave it in place year-round to capture the hornet workers as well. - In fall, for the capture of fertilized hornet queens, in most regions from October.

Original BeeVital attractant for Vespa Velutina trap, which consists of natural, sweet substances.The insects do not come into contact with the attractant in the trap.For the hornet trap against the Asian Hornet Vespa Velutina.

Galvanized wire mesh as fabric by the meter. Price per meter. • Mesh size: 2. 8 mm• Roller height: 100 cm

The new Velutina Trap Pro is a live trap for catching the Asian hornet, Vespa Velutina. Other insects can escape or be released from this trap. The European hornet is too big for this trap and therefore cannot be caught.The trap consists of:• An extra-large plastic collection container (5 liters volume) that allows plenty of free space for captured hornets, incl. Inlet hopper and bait container with float.• To ensure that the collection container does not heat up under sunlight, it is protected by a wood panel.• Aluminium weather protection with suspensionAs an attractant, we recommend a mixture of 1/3 beer, fruit juice and sweet wine.+++ IMPORTANT NOTE: +++Please do not use sugar water as an attractant, as this will lure bees into the trap!

Size: 510 x 415 mm. Made of flexible plastic, especially for propolis harvesting.The grid is placed on the uppermost frames. When it is cushioned, it is placed in the freezer. The propolis can then be easily broken off. With a grating you can harvest up to 100 g of propolis.However, the yield depends on bee breed, location, type of prey, weather and many more.

For hanging up, with two openings

With 8 exits, Ø 260 mm

Crabro selection adapters are inserted into the entry holes of our Velutina trap to reduce the diameter.

Set contains:• smoker (no. 6001347)• smoker tobacco (no. 6001358)• lighter cubes (no. 6001350)• beekeeper jacket (please advice your size!)• leather gloves (please adivce your size!)• bee brush (no. 6001214)• hive tool (no. 6001202)You can enter the sizes on the cart page in the comments field!

MW 3.5 mm. Castors height 50 cm per meter.

Bee Escape *Rhombus*

Material: EdelstahlWandstärke der Beute: max. 26 mmKapazität: bis zu 3 RähmchenGefertigt aus Ø 8 mm Edelstahldraht, mit angeschweißten Edelstahllaschen

445 mm long, one side with integrated 5.1 mm drone spaces and the other side with only ventilation.3-piece with two side guides.The slide gate and the handle on the back are made of solid plastic. The handle is extremely stable and cannot be deformed.

For 1 hive, 440 mm / 0,5 kg (1 set = 2 pcs)

Wired Extension Sensor for all models ApiGraph for recording the stick temperatureTechnical information- Resolution 0.1 °C- Cable length 1.5 m- Cable sensor with stainless steel sensor sleeve- 4-pin connector plug- Connection to stick scale or extension cable EasyLoad-CR3

Size: 960 x 530 mmHeight: 150 mmMade of weather-resistant plastic

Charging Cable for recharging the hive scale from the outsideTechnical information- Cable length: 50cm- With cap- 4-pole plug connection- Designed for outdoor use all year round- If brood chamber temperature sensor is used, sensor must be unplugged during charging process

Radio Extension Sensor for all models ApiGraph (except Junior) to detect the amount of precipitationTechnical information- Resolution: 0.5 liters per sqm- Radio range: up to 100 m- 2 pcs. AA batteries, runtime approx. 1 year

Solar Panel SolarLoad-CR3 for self-sufficient and year-round power supply for all models ApiGraphTechnical information- Cable length: 2 m (extendable on request)- Recommended for year-round outdoor use- Ground spike includedDimensions (Length × Width × Height): 21,60 × 13,50 × 4,00 cm

For frames without Hoffmann side bar. two Distance rolls have to be driven in at each side.For 10mm distance with pinMaterial:plasticIn neutral colourPack with 100 pcs.

Size: 440 x 530 mmHeight: 150 mmMade of weather-resistant plastic.

Mobile Battery for recharging all models ApiGraphTechnical information- Charging capacity 10 000 mAh- With USB port for mobile recharging- Recharging recommended at outdoor temperature > 10°C

Here you will find product videos: https://www.youtube.com/results?search_query=wolf+waagen   LTE beehive scale ApiGraph Generation 4 with Wolf SIM & server connectivity:Main hive scale with expansion options for loads up to 200 kg:Wolf SIM card basic charge for the first year included. Scope of delivery:• ApiGraph 4 beehive scale base frame• Cover plate configurable (51 × 51 cm or 43 × 51 cm – PLEASE SPECIFY WHEN ORDERING!)• Wolf SIM card (basic charge for the first year included)• USB charging cable• LTE antenna with stand base Technical Information• Battery: Rechargeable lithium-ion battery• Accuracy: 10 g• Load capacity: 200 kg• Measurement interval: 5 minutes• Temperature-compensated load cells: 2• Dual-beam system• Sensor connection interface available• Expansion scale connection interface available• Remote maintenance function available Optional sensors which are not included in the set.• Temperature/ humidity sensor ApiClimate-RF3 (no. 6005377)• Precipitation Sensor ApiRain-RF3 (no. 6005376)• Brood Body temperature sensor ApiBrood-CR3 (no. 6005375)• Wind sensor ApiWind-RF3 (no . 6005378) PLEASE NOTE:We want to point out the following running costs (with yearly payoff). For the first year these costs are included in the price. After the first year the costs will be charged directly by Wolf-Waagen. - Server charge 30.25 € excl. VAT for the first year independent to the number of scales. - Wolf SIM card (optional) 21.01 € excl. VAT for the first year per card incl. data communication

Wireless expansion sensor for all ApiGraph models (except Junior) for measuring wind direction and wind speedTechnical Information• Resolution: 0.5 m/s• Wind direction compass included• Wireless range: up to 100 m• Batteries: 2 × AAA (replace once per year) – not included

The reflective fleece is presented as a cost-efficient and effective supplement that optimises the internal climate of the hive.The fleece is designed in such a way that thermal radiation is reflected back into the hive space and a micro-perforation allows diffusion at the same time, which increases overall energy efficiency. The fleece is ideally suited for the construction of insulating covers, insulating bulkheads, insulating aprons and insulating floor inserts.Application on the Varroa cup:It is recommended to use reflective fleece in combination with a diffusion foil (masking foil), e.g. on the Varroa cup, in order to minimise heat loss through the hive bottom.Practical advantages:The fleece is easy to handle and helps to keep the internal climate of the hive stable, especially during colder seasons.Benefits for bees and beekeepers:Energy saving: The reflection fleece helps to reduce the heating power of the bees, which saves their energy.Roll width: 500 mm

For 2 hives, 960 mm / 1 kg (1 set = 2 pcs)

Radio Extension Sensor for all models ApiGraph (except Junior) for detection of outdoor temperature and humidityTechnical information- Resolution: 0.1 °C, 1% r.h.- Measuring range: 20-99% rel. humidity- Radio range: up to 100 m- 2 pcs. AAA batteries, runtime approx. 1 year

Professional hive lifter with electric drive, both wheels and lifting device The hive lifter can lift 100 kg from 0 cm to 107 cm height quickly and without any problems. The device only needs 11 seconds to do this. Manual loading into your transporter or onto the trailer of the device itself can now also be saved, as this hive lifter is driven by a chain and is thus able to lift itself up. All you have to do is push it manually into the hold or onto the loading area. The hive lifter has particularly wide jaws and can be used for both wooden and polystyrene hives due to its large surface. • Maximum lifting height: 107 cm • Measurements: 167 cm x 68.5 cm x 48 cm• weight: 52,5 kg • Speed: 6,5 km/h • Maximum lifting weight: 100 kg • Working time with one charge: 4 h • Charging time: 6 h Scope of delivery: Hive lifter and charger Available accessories: spare battery