Beehives

Top bar: 248 mmSide bar: 159 mmWith "hoffman" side barMaterial: spruce Looped, threefold wired with stainless steel wire 0,4 – 0,45 mm.Unit: 12 pcs.Weight: 960 g per unit+++ This product is not free of delivery costs.+++

The muzzle prevents the hornets from directly approaching the flight hole. Most bees are attacked by the hornets at the flight hole, making them easy victims. Experience shows that the hornet has to sit down first after passing through the muzzle before it can enter.Behind the grid, the bees can get to the flight hole from above. We recommend additional protection with entrance block.The muzzle should be attached to the hive in front of the flight hole with a strap (not included) and remain there from the end of August to about mid/end of November (depending on the weather).It is essential that the Varroa slider remains inserted, so that the hornets do not disturb the colony from below.The entrance block inserted from above should only be used after a few days. Once the bees get used to flying in from above, the flight hole can be narrowed with it.Additionally required: Zander Liebig entrance block against Asian Hornet, Item no. XXXWeight: 1.15 kg

Material: Spruce wood, Measurements: 445 x 20 x 20 mm, opening 350 mmWeight: 0,1 kg+++ This product is not free of delivery costs. +++

Plastics, low propitiation of the comb lugs. Acid-proof and easy to clean.

The muzzle prevents the hornets from directly approaching the flight hole. Most bees are attacked by the hornets at the flight hole, making them easy victims. Experience shows that the hornet has to sit down first after passing through the muzzle before it can enter.Behind the grid, the bees can get to the flight hole from above. We recommend additional protection with entrance block.The muzzle is attached by a tension strap or similar fastening materil (not included) in front of the entrance hole and should stay there from end of August until middle/end of November (depending on the weather).It is essential that the Varroa slider remains inserted, so that the hornets do not disturb the colony from below.The entrance block inserted from above should only be used after a few days. Once the bees get used to flying in from above, the flight hole can be narrowed with it.Additionally required: Entrance block for Segeberger Flat Floor against Asian Hornet, Item no. 6005056Weight: 1.2 kg

Prevents the penetration of mice and the Asian Hornet (Vespa Valutina).The block should be attached to the flight hole from the end of August until the beginning of the flight season (February/March - depending on the region and weather).Dimensions: 445 x 20 x 20 mmFor Dadant floor 6005161Weight: 0.1 kg

The bottom is equipped with a continuous grid for optimal air circulation, a Nicot insert for reliable Varroa control, and a Nicot entrance reducer (brown).A permanently mounted wooden adapter ensures compatibility with our Herold frames. Material: Plastic / woodDimensions: 495 x 438 mm (wooden adapter)Weight: 2.5 kg

The muzzle prevents the hornets from directly approaching the flight hole. Most bees are attacked by the hornets at the flight hole, making them easy victims. Experience shows that the hornet has to sit down first after passing through the muzzle before it can enter.Behind the grid, the bees can get to the flight hole from above. We recommend additional protection with entrance block.The muzzle is plugged in at the opening for the Varroa slider and should stay inserted from end of August until middle/end of November (depending on the weather).It is essential that the Varroa slider remains inserted, so that the hornets do not disturb the colony from below.The entrance block inserted from above should only be used after a few days. Once the bees get used to flying in from above, the flight hole can be narrowed with it.For optimal use, a tension strap or similar fastening material (not included) is required.Additionally required: Dadant entrance block against Asian Hornet, Item no. 6005311Weight: 1.6 kg

Prevents the penetration of mice and the Asian Hornet (Vespa Valutina).The block should be attached to the flight hole from the end of August until the beginning of the flight season (February/March - depending on the region and weather).Dimensions: 392 x 20 x 25 mmWeight: 0.1 kg

Prevents the penetration of mice and the Asian Hornet (Vespa Velutina).The block should be attached to the flight hole from the end of August until the beginning of the flight season (February/March - depending on the region and weather).For Dadant floor 6005015Dimensions: 380 x 28 x 28 mmWeight: 0.1 kg

Weight: 200 g+++ This product is not free of delivery costs. +++

for Segeberger-Beute

The queen excluder has a wooden frame. It only allows the bees to enter the super.Material: wooden frame beech wood / grid galvanizedDimensions: 420 x 520 mm (grid dimensions 395 x 480 mm)Weight: 1.3 kg

The super has a rise at the side and a baring across the access made of stainless steel.You have to plug up the supper bevor you use liquid bee feed. We advise our syntetic resin.Inner dimension: 40 x 38 x 4.9 cmMaterial: spruce / access made of stainless steelWeight: 5 kg+++ This product is not free of delivery costs. +++

Suitable for: Franken hive Measurement: 425 x 500 mmMaterial: PlasticRound rod, silver, acid-resistant and easy to clean.Prevents the queen and drones from ascending into the honeycomb.

The board has very high isolation characteristics and is also used to restrict the bee company inside the Dadant modified Brood Body.Material: expandable polystyrene with a high closenessWeight: 300 g+++ This products is not free of delivery costs.+++

The floor is equipped with a continuous grille for optimal air circulation, a Nicot insert board for reliable Varroa control and a Nicot entrance block (brown).A fix mounted adapter made of wood ensures compatibility with our Liebig broad bodies.Material: plastic / woodDimensions: 420 x 520 mm (wooden adapter)Weight: 2.4 kg

Inside the Roof made of wood there is an insulation board. The top of the roof has a waterproof glued laminated plastic plate (Tegoplatte).If you position your hive outside, we will advise a metal roof for a better whether protection. Material: spruce / TegoplatteWeight: 2,5 kg+++ This product is not free of delivery costs. +++

Weight: 0,9 kg+++ This product is not free of delivery costs. +++

The Nicot NCC feeder is suitable for solid and liquid feeding, as well as for feeding two colonies in one hive. The central ascent exposes the view of the colony strength. It is also possible to add a queen cell or a queen in a cage without opening the hive. The capacity of the two food bowls is 3.5 litres each. The smooth, pore-free surface makes cleaning easier.Illustration similar!In the picture the plugs and reduction gates are not visibleConsisting of:1 Nicot feeder NCC2 closure plugs4 Inlet reductions gatesMaterial: food grade, recyclable plasticDimensions: 430 x 510 mmWeight: 1.5 kg

Suitable for: Segeberger hive Measurement: 435 x 435 mmMaterial: Metal, galvanized with zincSpacing between: 4.2 mmWith transfixed bridge, stable, with bridges framed on the sides.Prevents the queen and drones from ascending into the honeycomb.

The plastic sliding board allows reliable control of varroa deposition. The smooth surface is particularly easy to maintain.Material: plastic (food safe, dishwasher safe)Weight: 0.4 kg

The herold ½ super can be implemented with 12 combs DN or 10 combs Zander with a height of 110 mm. It is provided with an aluminium rail for the Zander frames respectively wood rail for the DN frames.The corners of the super are glued and bolted.Material: spruceSize: 495 x 438 mm, wall thickness 30 mmWeight: 2,7 kg+++ This product is not free of delivery costs. +++

Weight: 1,3 kg+++ This product is not free of delivery costs. +++

The mouse guard is inserted into the entrance of the floor from September. It avoids that the mice get into the hive!

The Nicot NCC feeder is suitable for solid and liquid feeding, as well as for feeding two colonies in one hive. The central access panel allows you to see the strength of the colony. It can also be used to add a queen cell or a queen in a cage without having to open the hive. The capacity of the two feeding trays is 3.5 liters each. The smooth, non-porous surface makes cleaning easy.Consisting of:1 Nicot NCC feeder2 sealing plugs4 inlet reducersWooden frame suitable for our 12-frame Dadant hiveMaterial: Food-safe, recyclable plastic, spruce woodDimensions: 509 x 509 mmWeight: 2.7 kg

Prevents the penetration of mice and the Asian Hornet (Vespa Valutina).The block should be attached to the flight hole from the end of August until the beginning of the flight season (February/March - depending on the region and weather).Dimensions: 392 x 15 x 25 mmWeight: 0.1 kg

Suitable for: Herold hive Measurement: 403 x 475 mmMaterial: Metal, galvanized with zincSpacing between: 4.2 mmWith transfixed bridge, stable, with bridges framed on the sides.Prevents the queen and drones from ascending into the honeycomb.

Suitable for outside wooden coverWeight: 1,3 kg+++ This product is not free of delivery costs. +++

The metal cover is put over the outside cover and will protect your hive from the whether. The metal cover is zinc coated and the corners are point weld.Material: zinc coated tinSize: 450 x 555 mm, height 100 mm Weight: 1,3 kg+++ This product is not free of delivery costs. +++

The super can be implemented with 12 combs DN or 10 combs Zander. It is provided with an aluminium rail for the Zander frames respectively wood rail for the DN frames.The corners of the super are glued and bolted.Material: spruceSize: 495 x 438 mm, wall thickness 30 mmWeight: 5 kg+++ This product is not free of delivery costs. +++

Contains:• 1 floor/ entrance block• 1 lift• 5 frames with Hoffman-Seitenteil• 1 frame feeder• 1 inside cover• 1 insulation board• 1 outside coverWeight: 3,1 kg+++ This product is not free of delivery costs.+++

Herold hive (complete) consisting of:• 1 lid• 3 supers• 1 high floor• fits Deutsch Normal (german standard) and Zander frames• measurements: 495 x 438 mm, walls 30 mm thick- Delivery without frames, without paint -Weight: approx. 22,6 kg

Weight: 1,2 kg+++ This product is not free of delivery costs.+++

Weight: 0,8 kg+++ This product is not free of delivery costs. +++

Dadant hive (complete) consisting of:• 1 outside lid• 1 inside lid• 1 insulation board• 1 brood super• 2 honey supers• 1 floor with perforated metal plate in aluminium• 1 entrance block• 1 insert for varroa screening• 1 queen excluder- Delivery without frames, without paint -Weight: approx. 20,9 kg

The high floor contains:• Building barrier• Aeration grid• Baring board• Entrance blockWithout Varroa screenMaterial: spruceWeight: 5,1 kg+++ This product is not free of delivery costs.+++

The muzzle prevents the hornets from directly approaching the flight hole. Most bees are attacked by the hornets at the flight hole, making them easy victims. Experience shows that the hornet has to sit down first after passing through the muzzle before it can enter.Behind the grid, the bees can get to the flight hole from above. We recommend additional protection with entrance block.The muzzle is attached by a tension strap or similar fastening materil (not included) in front of the entrance hole and should stay there from end of August until middle/end of November (depending on the weather).It is essential that the Varroa slider remains inserted, so that the hornets do not disturb the colony from below.The entrance block inserted from above should only be used after a few days. Once the bees get used to flying in from above, the flight hole can be narrowed with it.Additionally required: Entrance block for Segeberger High Floor / Universal Floor against Asian Hornet, Item no. 6005058Weight: 1.2 kg

Zander Liebig Insulation board for inner cover.The insulation board is made of cellulose to fit the inner cover. It serves the optimal insulation of the prey against strong sunlight in summer as well as against cold in winter.Material: celluloseMatching items: Zander Liebig inner cover 6005012Weight: 0.8 kg

The intermediate floor commands a small entrance and a bunghole for bee escape. Therefore, it can also be used as a bee escape or as a layer maker. It contains a bee escape as well as a blind lid.Material: spruceWeight: 2,3 kg+++ This product is not free of delivery costs. +++

The feeder has a rise in the middle. The shipment also contains a bubble cap to bare the rise.TIP: You have to plug up the supper bevor you use liquid bee feed. We advise bee wax or synthetic resin.Capacity: ca. 10 kg (ca. 7l)Weight: 2,6 kg+++ This product is not free of delivery costs. +++

The shallow super has aluminium rails and space for 10 frames.2 rails at the bottom of the super give stability and make sure that it will not slip-off.The corner joints of the frame are in groove and spring, glued and screwed.Material: Weymouth pineMeasurements: 420 x 520 mm, Height 168 mmWeight: 2.9 kg

The muzzle prevents the hornets from directly approaching the flight hole. Most bees are attacked by the hornets at the flight hole, making them easy victims. Experience shows that the hornet has to sit down first after passing through the muzzle before it can enter. Behind the grid, the bees can get to the flight hole from above. We recommend additional protection of entrance.The muzzle is plugged in at the openings for the alighting board and should stay inserted from end of August until middle/end of November (depending on the weather).It is essential that the Varroa slider remains inserted, so that the hornets do not disturb the colony from below.The entrance block inserted from above should only be used after a few days. Once the bees get used to flying in from above, the flight hole can be narrowed with it.For optimal use, a tension strap or similar fastening material (not included) is required.Weight: 1.6 kg

Weight: 2,6 kg+++ This product is not free of delivery costs. +++

Weight: 1,2 kg+++ This product is not free of delivery costs. +++

Use:The frame feeder has to be put with the higher side at the side of the Brood Body. The lower side has to point towards the bee company.We advise to fill the frame feeder with syrup patty.If you want to use liquid feed, you’ll have to plug the frame feeder bevor use with bee wax or TIP: the frame feeder can with its higher side also be used as a Dummy Board.Material: wallboardSize: 248 x 159 mm – capacity ca 0,5 litreWeight: 1,1 kg+++ This product is not free of delivery costs.+++

Plastics, with extra grove for low propitiation of the comb lugs. Acid-proof and easy to clean.

The Zander-Dadant Brood body has aluminium rails and space for 10 frames.2 rails at the bottom of the body give stability and make sure that it will not slip-off.The corner joints of the frame are in groove and spring, glued and screwed.Material: Weymouth pineMeasurements: 420 x 520 mm, Height 295 mmWeight: 4.6 kg

Weight: 1,7 kg+++ This product is not free of delivery costs. +++