Antriebe für Honigschleudern - CFM Qualität aus Mellrichstadt!

You would like to retrofit your honey extractor with another drive?

For our CFM-honey extractors we have listed here the drives which you can assemble yourself. So you can change your honey extractor according to your needs.

Would you like a complete rebuild of your CFM honey extractor?

Then please contact us, we will be pleased to submit you an appropriate offer.

CFM-"Whispering Witch" mounted on a travers with lid halves (for retrofitting/as replacement)

5000081

CFM-"Whispering Witch" mounted on a travers with lid halves (for retrofitting/as replacement)

CFM "Whispering Witch" - the original from Mellrichstadt!Only available for CFM-honey extractors of art. no. 5004300, 5010400 and 5037000 with distance between holes centre to centre 525 mm and 630 mm as well as our current extractors Nr. 5002500, 5009400, 5014400 und 5055012Technical data:• Direct drive motor 40 W / 230 V CFM-"Whispering witch"• Very quiet drive even at full speed• Speed control 80 - 350 rpm• Stainless steel traverse with hinged acrylic glass lid halves• Safety deviceWhen you order please advise:• Inner tank Ø• Shaft Ø at the top and bottom• Distance between the 2 holes for the screws which hold the traverse measured from the middle of the holes.• If you replace a manual drive please advise length of the driver below the traversePlease note: If you have different measurements and we need to customize a surcharge applies!

€899.00*

5000071

Motor 110W/230V mounted on a travers with lid halves (for retrofitting/as replacement)

Only available for CFM-honey extractors of art. no. 5004300, 5010400 and 5037000 with distance between holes centre to centre 525 mm and 630 mm as well as our current extractors Nr. 5002500, 5009400, 5014400 und 5055012 Technical data: • Top drive motor 110 W / 230 V CFM-"Extractor witch" • Stainless steel traverse with hinged acrylic glass lid halves • Safety device When you order please advise: • Inner tank Ø • Shaft Ø at the top and bottom • Distance between the 2 holes for the screws which hold the traverse measured from the middle of the holes. • If you replace a manual drive please advise length of the driver below the traverse Please note: If you have different measurements and we need to customize a surcharge applies!

€669.00*

5800071

Top drive motor, fully automatic, 180 W / 230 V (for retrofitting/as replacement)

Suitable for: - Honey extractors with an inner-Ø 69 - 77 cm Technical data: - 180 W / 230 V top drive gear motor with 3 m control cable - Stainless steel traverse with hinged lids - Lid closing device - Fully automatic program control Please specify the following dimensions of your slingshot when ordering: a) from the centrifugal boiler: boiler inner Ø, distance from the centre of the retaining bolt to the centre of the retaining bolt b) from the honeycomb basket: connection dimensions, i. e. Ø of the shaft or the square in mm The lid locking device is fitted to monitor the position of the lid and to lock it. The bracket belonging to the safety switch is supplied together with an angle separately. The flap and the bracket must be attached to the centrifugal foot in such a way that when the lid is closed it engages in the opening provided on the safety switch. The motor is connected to the controller via a solid shielded cable. The connections of the controller are made with heavy industrial connectors with IP67 protection. Power is supplied via a 3 m long cable with Schuko plug.

€2,320.00*

5000052

Hand drive mounted on a traverse, with hinged acrylic glass lid halves

Manual drive with freewheel and brake incl. hinged lid halves. Only available for tank Ø 50 cm and 60 cm and distance between the two holes of the traverse of 525 mm and 630 mm. When you order please advise: • Inner tank Ø • Shaft Ø at the top and bottom • Distance between the 2 holes for the screws which hold the traverse measured from the middle of the holes. Please note: If you have different measurements and we need to customize a surcharge applies!

€232.00*

Top drive gear motor 270W/230V mounted on a travers with lid halves (for retrofitting/as replacement)

5700071

Top drive gear motor 270W/230V mounted on a travers with lid halves (for retrofitting/as replacement)

Suitable for: • Honey extractors with an inner-Ø 63 - 72 cm Technical data: • Upper drive gear motor 270 W / 230 V • Stainless steel traverse with hinged lids • Safety device • manual speed control by rotary knob When you order please advise: • Inner tank Ø • Shaft Ø at the top and bottom • Distance between the 2 holes for the screws which hold the traverse measured from the middle of the holes. • If you replace a manual drive please advise length of the driver below the traverse Please note: If you have different measurements and we need to customize a surcharge applies! The lid locking device is mounted to monitor the position of the lid and to lock it. The bracket belonging to the safety switch is supplied together with an angle separately. The flap and the bracket must be attached to the centrifugal foot in such a way that when the lid is closed it engages in the opening provided on the safety switch. The motor is equipped with a 3 m long cable with Schuko plug.

€1,197.00*