€1,095.00
Available, Lieferzeit 1 - 3 Arbeitstage
Product information
Advantages are the compact design and the fact that you can run this honey extractor without electricity.
This extractor is equipped with a honey tap and has two practical handles at the tank.
For cleaning just loosen the two screws of the traverse and take off the drive incl. the lids.
Suitable for:
• 12 shallow frames up to 16 cm side bar length and 42 mm side bar width
• Frame sizes: Dadant shallow frames, Zander shallow frames, German Standard shallow frames, Langstroth shallow frames
Technical details:
• Manual drive with hinged lid halfs
• Inner tank Ø 55 cm, welded bottom without gap
• Tank bottom with slope to the outlet
• Outlet: 1 1/2" honey tap, welded at bottom level
• Handles at the lower end of the tank
• Radial cage for 12 shallow frames
• Material: Edelstahl-Rostfrei
• Loading height: 100 cm
• Total height: 110 cm
• Distance from floor to the tap 38 cm
• Can be modified to extract tangential
Included in the delivery:
1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.
Weight with/without wrapping: XX kg / XX kg
Wrapping: cardboard box
Chargeable weight: 26 kg
Spare parts and accessories:
Item no. 6000070 Ball for bearing
Item no. 6300061 Rubber feet
Item no. 6000074 Food lubricant grease for bottom bearing 20 g
Item no. 23045007 Sealant for bottom bearing
Item no. 5203712 12 frames radial cage
Item no. 5303712 3 grids
Item no. 5003244 4 frames tangential cage 32 x 46cm
Acrylic glass lid half on request
| Capacity of frames: | 12 Halbrahmen |
|---|---|
| Diameter: | 55 cm |
| Frame size: | Dadant US (Honigraum) 482 x 141 mm, Deutsch Normal flach 394 x 159 mm, Deutsch Normal halb 394 x 110 mm, Zander flach 477 x 159 mm, Zander shallow 477 x 110 mm |
| Motor power: | Manual drive |
| Outlet: | Quetschhahn 1½" |
| Side bar length max.: | 16 cm (42 mm breit) |
Login
accessories
1 set (contains 3 pieces) of rubber feet with metal parts from stainless steel for honey extractors up to inner-Ø 63 cm with M8 threaded pin and nut. Protect your floors and ensure your extractor stands more firmly. Height of each rubber foot is 28 cm.
Ball small Ø 10 mm for insertion into the bottom bearing.For honey extractors with drive or motor on TOP of the honey extractor.
Cage without going through shaft so that the frames can be turned inside the cage.For extractors with Ø 55 cm.Stainless steel, grid area of the cage 32 x 46 cm.Our standard size on top and bottom of the drive shaft: Ø 14 mm.For order indicate the diameter of the shaft (top and bottom) and the length of the shaft.
• Grid area 330 x 450 mm• 3 grids made of stainless steel• To insert into radial honey extractors with inner tank Ø 55 cm• For 3 deep frames / 6 shallow framesFits honey extractors item no. 5055012 - 5255012
CFM "Whispering Witch" - the original from Mellrichstadt!Only available for CFM-honey extractors of art. no. 5004300, 5010400 and 5037000 with distance between holes centre to centre 525 mm and 630 mm as well as our current extractors Nr. 5002500, 5009400, 5014400 und 5055012Technical data:• Direct drive motor 40 W / 230 V CFM-"Whispering witch"• Very quiet drive even at full speed• Speed control 80 - 350 rpm• Stainless steel traverse with hinged acrylic glass lid halves• Safety deviceWhen you order please advise:• Inner tank Ø• Shaft Ø at the top and bottom• Distance between the 2 holes for the screws which hold the traverse measured from the middle of the holes.• If you replace a manual drive please advise length of the driver below the traversePlease note: If you have different measurements and we need to customize a surcharge applies!
Please note: Only for extractors building year 2021 or later. Plastic sealant for extractors with top drive, for example manual drive or with motor on top.This sealant is to cover the bottom bearing while cleaning the tank.Colour: yellow
Food grade grease for the bottom bearing.Suitable for all CFM honey extractors for re-greasing the bottom bearing for optimum rotation of the honeycomb cage.For regular maintenance of your honey extractor.Contents: tin with 20 g
Content: 0.02 Kilogramm (€325.00 / 1 Kilogramm)
Made of stainless steel, for inner tank Ø 55 cm.Shaft length 535 mm, Shaft Ø 14 mmIn this radial cage fit shallow frames up to • sidebar length 16 cm • sidebar width 42 mm
Only available for CFM-honey extractors of art. no. 5004300, 5010400 and 5037000 with distance between holes centre to centre 525 mm and 630 mm as well as our current extractors Nr. 5002500, 5009400, 5014400 und 5055012Technical data:• Top drive motor 110 W / 230 V CFM-"Extractor witch"• Stainless steel traverse with hinged acrylic glass lid halves• Safety deviceWhen you order please advise:• Inner tank Ø• Shaft Ø at the top and bottom• Distance between the 2 holes for the screws which hold the traverse measured from the middle of the holes.• If you replace a manual drive please advise length of the driver below the traversePlease note: If you have different measurements and we need to customize a surcharge applies!
similar items
The smallest of our CFM-Honey radial extractors with "Extractor Witch" (motor drive).This extractor is equipped with a honey tap and has two practical handles at the tank.For cleaning just loosen the two screws of the traverse and take off the drive incl. the lids.Suitable for:• 12 shallow frames up to 16 cm side bar length and 42 mm side bar width • Frame sizes: Dadant shallow frames, Zander shallow frames, German Standard shallow frames, Langstroth shallow frames• Direct drive with security switch• Motor power 110 W / 230 V• Hinged acrylic glass lid halves• Inner tank Ø 55 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Radial cage for 12 shallow frames• Material: Edelstahl-Rostfrei• Loading height: 100 cm• Total height: 111 cm• Distance from floor to the tap 38 cm• Can be modified to extract tangentialIncluded in the delivery:1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: 30 kg / 24 kgWrapping: cardboard boxSpare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingItem no. 5203712 12 frames radial cageItem no. 5303712 3 gridsItem no. 5003244 4 frames tangential cage 32 x 46cmAcrylic glass lid half on request
The smallest of our CFM-Honey radial extractors with "Whispering Witch".Why "Whispering"? Because this drive is amazingly quiet even at full speed. In addition to the superb quietness of the drive, the comfortable operation is also a major advantage. With a rotary knob you have everything under control – can it be easier?This extractor is equipped with a honey tap and has two practical handles at the tank.For cleaning just loosen the two screws of the traverse and take off the drive incl. the lids.Suitable for:• 12 shallow frames up to 16 cm side bar length and 42 mm side bar width • Frame sizes: Dadant shallow frames, Zander shallow frames, German Standard shallow frames, Langstroth shallow frames• Direct drive with security switch• Motor power 40 W / 230 V• Very quiet drive even at full speed• Speed control 80 - 350 rpm• Hinged acrylic glass lid halves• Inner tank Ø 55 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Radial cage for 12 shallow frames• Material: Edelstahl-Rostfrei• Loading height: 100 cm• Total height: 115 cm• Distance from floor to the tap 38 cm• Can be modified to extract tangentialIncluded in the delivery:1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: XX kg / XX kgWrapping: cardboard boxChargeable weight: 40 kg Spare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingItem no. 5203712 12 frames radial cageItem no. 5303712 3 gridsItem no. 5003244 4 frames tangential cage 32 x 46cmAcrylic glass lid half on request