CFM-Radial extractor Ø 63cm, 18 shallow frames, with "Extractor Witch"
€1,625.00
Available, Lieferzeit 1 - 3 Arbeitstage
Product information
For cleaning just open the wing nuts at the cross-beam and take off the complete drive including the lids.
Suitable for:
• 18 shallow frames (side bar up to 16 cm and side bar width 42 mm)
• Frame sizes: Dadant super, Zander half and super, German Standard half and super, Langstroth half and super frames
Technical details:
• Top drive with safety device
• Motor 110 W / 230 V
• Hinged acrylic glass lid halfs
• Inner tank Ø 63 cm, welded bottom without gap
• Tank bottom with slope to the outlet
• Outlet: 1 1/2" honey tap, welded at bottom level
• Handles at the lower end of the tank
• Radial cage for 18 shallow frames
• Material: Stainless Steel
• Loading height: 100 cm
• Total height: 111 cm
• Distance from the floor to the honey tap: 38 cm
• Conversion into tangential extractor possible
Included in the delivery:
1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.
Weight with/without wrapping: approx. 46 kg / approx. 40 kg
Chargeable weight: 46 kg
Spare parts and accessories:
Item no. 6000070 Ball for bearing
Item no. 6300061 Rubber feet
Item no. 6000074 Food lubricant grease for bottom bearing 20 g
Item no. 23045007 Sealant for bottom bearing
Item no. 5203818 Radial cage for 18 shallow frames
Item no. 5303818 Grids to insert into the cage
Item no. 5003840 4-Frames tangential cage
Acrylic glass lid half on request
| Capacity of frames: | 18 Halbrahmen |
|---|---|
| Diameter: | 63 cm |
| Frame size: | Dadant US (Honigraum) 482 x 141 mm, Deutsch Normal flach 394 x 159 mm, Deutsch Normal halb 394 x 110 mm, Zander flach 477 x 159 mm, Zander shallow 477 x 110 mm |
| Motor power: | 110 W / 230 V |
| Outlet: | Quetschhahn 1½" |
| Side bar length max.: | 16,5 cm (42 mm breit) |
Carl Fritz Imkertechnik GmbH & Co. KG
Immenweg 1
97638 Mellrichstadt Tel. +49 9776 8115-0
info@carl-fritz.de
Login
accessories
Ball small Ø 10 mm for insertion into the bottom bearing.For honey extractors with drive or motor on TOP of the honey extractor.
• Grid area 400 x 450 mm• 3 grids made of stainless steel• To insert into radial honey extractors with inner tank Ø 63 cm• For 3 deep frames / 6 shallow framesFits honey extractors item no. 5163018 and 5263018
1 Set (contains 3 pieces) of rubber feet with metal parts from stainless steel for honey extractors up to inner-Ø 69 - 77 cm with M10 threaded pin and nut.Protect your floors and ensure your extractor stands more firmly.Height of each rubber foot is 20 cm.
Consists of: - 2 mm thick seal for the honey tap clear width 44mm (1 1/2" - no. 5000079) - self-adhesive- 2 mm thick thrust washer between the lower part and the top partMade of food-grade materialWeight: 0.1kg
Please note: Only for extractors building year 2021 or later. Plastic sealant for extractors with top drive, for example manual drive or with motor on top.This sealant is to cover the bottom bearing while cleaning the tank.Colour: yellow
Food grade grease for the bottom bearing.Suitable for all CFM honey extractors for re-greasing the bottom bearing for optimum rotation of the honeycomb cage.For regular maintenance of your honey extractor.Contents: tin with 20 g
Content: 0.02 Kilogramm (€325.00 / 1 Kilogramm)
The installation of the bottom heating system (silicone heating mat) 1000 W / 230 V is installed by our expert staff. After installation, the heating mat is additionally insulated on the underside with 9 mm isoGLAS® needle felt to prevent heat loss.Bottom heating thermostatically adjustable for top drive honey extractors with inner-Ø of 63 cm.
Made of stainless steel, for inner tank Ø 63 cm.Shaft length 535 mm, Shaft Ø 14 mm (included)In this radial cage fit shallow frames up to • sidebar length 16.5 cm • sidebar width 42 mm
Cage without going through shaft so that the frames can be turned inside the cage.For extractors with Ø 63 cm.Stainless steel, grid area of the cage 38 x 46 cm.Our standard size on top and bottom of the drive shaft: Ø 14 mm.For order indicate the diameter of the shaft (top and bottom) and the length of the shaft.
Plastic cover for the bottom bearing of honey extractors with top drive e.g. manual drive or drive installed on top.The plastic cover protects the bottom bearing while cleaning the Honey extractor.colour: yellow
Consists of: - 4 mm thick honey tap top part made of stainless steel- 2 mm thick seal for the honey tap - already glued on- Stainless steel disc spring - already mounted- Plastic sliding bearings - already mounted- 2 mm thick thrust washer between the lower part and the top part- Stainless steel screw and nut M6Made of food-grade materialWeight: 0.1kg