CFM-Self-turning extractor 4 frames, Ø 72cm, 270W motor drive
€3,115.00
Available in 21 days, Lieferzeit 1 - 3 Arbeitstage
Product information
Suitable for:
• 4 deep frames side bar length up to 27 cm
• Frame sizes: Zander, German Standard, Langstroth, Gerstung, Kuntzsch, Austrian Breitwabe
Technical details:
• Safety device with lid lock
• Top drive gear motor 270 W / 230 V
• Left / right turn
• Speed infinitely adjusted
• Hinged acrylic glass lid halfs
• Inner tank Ø 72 cm, welded bottom without gap
• Tank bottom with slope to the outlet
• Outlet: 2" honey tap, welded at bottom level
• Frame pocket size 28 cm x 45 cm
• Material:stainless steel
• Loading height: 112 cm
• Total height: 128 cm
• Distance from the floor to the honey tap: 38 cm
Weight: without/with wrapping: 68 kg / 80 kg
| Capacity of frames: | 4 Ganzrahmen |
|---|---|
| Diameter: | 72 cm |
| Frame size: | Deutsch Normal 394 x 223 mm, Gerstung 260 x 410 mm, Kuntzsch 330 x 250 mm, Langstroth 482 x 232 mm, Zander 477 x 220 mm |
| Motor power: | 270 W / 230 V |
| Outlet: | Quetschhahn 2" |
Carl Fritz Imkertechnik GmbH & Co. KG
Immenweg 1
97638 Mellrichstadt Tel. +49 9776 8115-0
info@carl-fritz.de
Login
accessories
Ball small Ø 10 mm for insertion into the bottom bearing.For honey extractors with drive or motor on TOP of the honey extractor.
1 Set (contains 3 pieces) of rubber feet with metal parts from stainless steel for honey extractors up to inner-Ø 69 - 77 cm with M10 threaded pin and nut.Protect your floors and ensure your extractor stands more firmly.Height of each rubber foot is 20 cm.
Consists of: - 2 mm thick seal for the honey tap clear width 55mm (2" - no. 5000086) - self-adhesive- 2 mm thick thrust washer between the lower part and the top partMade of food-grade materialWeight: 0.1kg
The installation of the bottom heating system (silicone heating mat) 1500 W / 230 V is installed by our expert staff.After installation, the heating mat is additionally insulated on the underside with 9 mm isoGLAS® needle felt to prevent heat loss. Bottom heating thermostatically adjustable for top drive honey extractors with inner-Ø of 72 cm.
Please note: Only for extractors building year 2021 or later. Plastic sealant for extractors with top drive, for example manual drive or with motor on top.This sealant is to cover the bottom bearing while cleaning the tank.Colour: yellow
Food grade grease for the bottom bearing.Suitable for all CFM honey extractors for re-greasing the bottom bearing for optimum rotation of the honeycomb cage.For regular maintenance of your honey extractor.Contents: tin with 20 g
Content: 0.02 Kilogramm (€325.00 / 1 Kilogramm)
Consists of: - 6 mm thick honey tap top part made of stainless steel- 2 mm thick seal for the honey tap - already glued on- Stainless steel disc spring - already mounted- Plastic sliding bearings - already mounted- 2 mm thick thrust washer between the lower part and the top part- Stainless steel screw and nut M8Made of food-grade materialWeight: 0.1kg