Honey strainers

Click here for the product video --> https://www.youtube.com/shorts/SH5vL3G3QxwA sustainable and far more durable alternative to the well-known nylon cheesecloth is now available for the Melitherm AR.Due to its material the new stainless steel fine strainer with a mesh width of 0.30 mm contributes to an optimal heat distribution on the bottom and thus allows the honey crystals to melt much faster, which makes the process more efficient. An additional plus is the uncomplicated and fast cleaning of the strainer. • suitable for container inner Ø 30 cm• THE alternative to the Melitherm nylon cheesecloth! • The strainer is placed inside the Melitherm instead of the cheesecloth.• Suitable for Melitherm AR (item: 5390239) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 30 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).THE alternative for the Melitherm nylon cheesecloth!The strainer is placed in the Melitherm above the strainer bottom instead of the cheesecloth.• Suitable for Melitherm tanks (item: 5390239)• Optimal heat distribution at the bottom• Reusable• Hygienic and easy to cleanMaterial: Stainless steel with extra-fine sieve fabric (mesh size 0.30 mm)Sieve diameter: approx. 30 cmWith sealing ring as a circumferential seal to the container wall (included in delivery).

Stainless steel.Large straining surface ensures no blocking of the strainer. High walls allow wax particles to rise to the top. The combination of strainer and tank 5009164/5099164 (32 kg tank) is ideal for a permanent straining process.• Mesh size 0.5mm• Height: 28.5 cm• Top Ø: 30 cm (without handles)• Bottom Ø: 17.6 cmNOTE:If the conical strainer is inserted in the tank, it cannot be closed! The lid can only be placed loosely on top.If you want to close the tank properly again, the conical strainer MUST be removed!

CFM-Double strainer with adjustable support. Made of stainless steel.Mesh size:• fine 0.5 mm• coarse 1.5 mm

Solid coarse strainer made of stainless steel.Ø approx. 22 cm, mesh size 1.5 mmAdditional equipment - please purchase separately:item no. 5000153 support for coarse strainer

Support made of stainless steel for coarse strainer Ø 22 cm.So you can use the coarse strainer separately, for example for heather or melezitose honey.Additional equipment - please purchase separately:item no. 5009156 Coarse strainer Ø 22 cm

Stainless steel.Large straining surface ensures no blocking of the strainer. High walls allow wax particles to rise to the top. The strainer fits all our 50 kg tanks with a second valve at the top. • Mesh size 0.5mm• Height: 60 cm• Top Ø: 30 cm (without handles)• Bottom Ø: 18.6 cmNOTE:If the conical strainer is inserted in the tank, it cannot be closed! The lid can only be placed loosely on top.If you want to close the tank properly again, the conical strainer MUST be removed!

Replacement sealing ring for CFM stainless steel strainer extra fine (no. 5000155) and inner ring (no. 47100004) suitable for Melitherm® AR (no. 5390239).

suitable for all common honey tanks 25-50 kg

• Suitable for tank inner Ø 48 cm• THE alternative to the Melitherm Profi strainer bag! • The strainer is placed inside the Melitherm Profi instead of the strainer bag.• Suitable for Melitherm Profi (item: 5302390) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 48 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).

CFM-Double strainer made of stainless steel.Fits exactly into CFM-Filling tanks from 25 - 50 kg - no support needed!Ø 30,5 cm, Mesh size coarse 1.5 mm and fine 0.5 mm

Ideal combination with nylon strainer round no. 6099141Length: approx. 70 cm

to use with coiled heater - prevents strainer heat damage

CFM-Conical double strainer with adjustable support. Made of stainless steel.Mesh size:• fine 0.5 mm• coarse 1.5 mm

CFM-Coarse strainer made of stainless steel.Ø approx. 30 cm, mesh size 1.5 mmAdditional equipment - please purchase separately:item no. 5000147 support for coarse strainer

fits all common buckets and honey tanks up to 50 kg

Strainer support made of stainless steel Ø approx. 30 cm.So the coarse strainer can be used separately for example for heather honey.Please note: The strainer is not included and has to be ordered separately

Our proven straining-system as a complete set - in a 4 cm higher version - consisting of:CFM-filling tank 35 kg with second upper taps and loose lidDetails:• Inner tank Ø 30 cm, welded bottom without gap• Loose lid• Drop handles• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Overflow: honey tap, clear width 36mm• Material: Stainless steel• Height 39 cmCFM Conical Fine FilterDue to the large filter area, the screen mesh does not clog, as the wax particles always float on top.• Mesh size: 0.5 mm• Height: 33.5 cm• Top Ø: 30 cm, bottom Ø: 17.6 cm• Material: Stainless steelCFM Coarse strainer• Ø approximately 22 cm, mesh size 1.5 mm• Material: Stainless steelCFM-holder for coarse strainer• Material: Stainless steelTotal height of the set: 41 cm

fits into no. 6000140

• Suitable for tank inner Ø 55 cm• THE alternative to the Megatherma strainer bag! • The strainer is placed inside the Megatherma instead of the strainer bag.• Suitable for Megatherma (item: 5323900) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 55 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).

Replacement sealing ring for CFM stainless steel strainer extra fine (no. 5002155) suitable for Melitherm® Profi (no. 5302390).

Our CFM strainer is a very effective tool if you want to sieve up to 500 kg of honey a day.Take advantage of the different specific weights of honey and wax - wax is lighter than honey and floats on the surface of the honey.First you hang the fine conical nylon strainer in the tank and secure it with the supplied clamping ring so that it cannot slip anymore. Then, you put the perforated sheet cone into the nylon strainer and hang the heating element inside. Please fill the tank fairly quickly so that the strainer does not clog up with wax particles right away. The lower tap remains closed so that the honey level rises to the upper outlet. The lighter wax particles float on the surface of the honey, so the strainer surface below the upper tap remains free of wax particles for a long time. Leave the top tap open. Through this you can pour the filtered honey into hobbocks or other tanks. You only need the lower tap to empty the container completely.Note: Since the honey only comes into contact with the heating element for a short time due to the constant release, the honey does not suffer any damage.Details:• Inner tank Ø 43 cm, welded bottom without gap• Rigid handles• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Upper outlet: Welded-on DN 50 dairy thread with 2" honey tap to screw on• Locking ring• Loose lid• Material: Stainless steel• Fine conical nylon strainer (mesh size 0.35 mm) and coarse nylon strainer (mesh size 1 mm)• Stainless steel perforated sheet cone • Dana api Therma II 1000W / 230V• Very large sieve capacity• Height: 78 cm• Weight: 17 kg• Our recommendation when you have approx. 50 hivesChargeable weight: 30 kg(Picture similar)

With bottom heating. To place directly under the tap of your honey extractor.Details:• Inner tank Ø 55cm, welded bottom without gap• Rigid handles• Tank bottom with slope to the outlet• Outlet: DN50 dairy thread weldet at bottom level with screwed on DN 50 disc valve• To connect to tube connection (item number 49000040 - not included)• Sieve insert can be taken out• Material: Stainless steel• Bottom heating 1000 W / 230 V, control with a thermostat from 0 - 85°C• Height: 35 cm• Weight: XX kg• Our recommendation for 50 or more bee hives

Watch product-video https://youtube.com/shorts/yX2GnOyORugSwienty scraper for honey strainers has been developed by beekeepers for beekeepers.

Fits into conical nylon strainer no. 6099140, length approx. 60 cm

Ideal combination with nylon strainer round no. 6009141Length: approx. 60 cm

CFM-Double strainer made of stainless steel.Fits exactly into CFM-Filling tank 100 kg - no support needed!Ø 43 cm, Mesh size coarse 1.5 mm and fine 0.5 mm

Foodgrade conical nylon strainer xxfine (200 Mikron Ø45cm (app. 70 cm long).Ideal in combination with Nylon strainer round, coarse, Ø 45 cm Nr. 6009141

The filter is used for filtering a high quantity of pre-clarified honey. In- and outlet is DN 50 dairy thread. This connection is very easy to fix and remove.Details:Mesh size: 0.4mmWire size: 0.22mmSieve opening (clear width): 0.18mmOverall length: 50cm

Replacement sealing ring for CFM stainless steel strainer extra fine (no. 5003155) and inner ring for CFM-Giga Therma by Geller (no. 49500027).

To place directly under the tap of your honey extractor.Details:• Inner tank Ø 55cm, welded bottom without gap• Rigid handles• Tank bottom with slope to the outlet• Outlet: DN50 dairy thread weldet at bottom level with screwed on DN 50 disk valve• To connect to tube connection (item number 49000040 - not included)• Sieve insert can be taken out• Material: Stainless steel• Height: 35 cm• Weight: 14.9 kg• Our recommendation for 50 or more bee hives

ideal combination with nylon strainer round no. 6009141

Stainless steel for CFM double strainer No. 5300148 or for nylon conical strainer No. 6000140. The lid fits to all tanks up to inner Ø 55 cm.

With the CFM Adapter lid, you can also use our CFM double sieve or nylon strainer on larger tanks.The adapter fits on tanks with a max. outside Ø up to 57.5cm.The adapter has an inner Ø of 43 cm.Suitable for the following sieves:5300152 CFM Double strainer Ø 43 cm6099140 Nylon strainer fine Ø 45 cm (approx. 70 cm long)6999140 Nylon strainer fine Ø 45 cm extra long version (approx. 90 cm long)6009140 Nylon conical strainer fine Ø 45 cm (approx. 60 cm long) 6099141 Nylon coarse strainer Ø 45 cm as conical strainer (approx. 60 cm long)6009141 Nylon coarse strainer round Ø 45 cm

With the CFM honey sump you can clarify your honey gently and without effort. In the first step the coarse particles are filtered out in the sieve pan (made of perforated plate). The honey then continues to flow through the six baffles. • Stainless steel• Capacity: approx. 250 kg• Fits under all CFM extractors• Direct, complete and absolutely even heating of the honey • Thermostatically controllable immersion tube heater 0 - 85°C (3000 W/230 V)• Dimensions of the clarifier with 2" ball valve and DN 50 hose connection: 1300 x 820 x 320 mm • Our recommendation from approx. 50 bee colonies

fits all common honey tanks from 100 - 350 kg

*** Special price II. choice with small flaws - works perfectly ***To place directly under the tap of your honey extractor.Details:• Inner tank Ø 55cm, welded bottom without gap• Rigid handles• Tank bottom with slope to the outlet• Outlet: DN50 dairy thread weldet at bottom level with screwed on DN 50 disk valve• To connect to tube connection (item number 49000040 - not included)• Sieve insert can be taken out• Material: Stainless steel• Height: 35 cm• Weight: 14.9 kg• Our recommendation for 50 or more bee hives

to use with coiled heater - prevents strainer heat damage

fits into conical nylon strainer no. 6009140