A must have for every beekeeper - with our honey strainers you remove coarse and fine particles from your honey e. g. wax residues.
You will get our CFM-strainer in the highest quality and always made of stainless steel!
5000155
CFM-Stainless steel strainer for Melitherm AR extra fine with silicon seal
Click here for the product video --> https://www.youtube.com/shorts/SH5vL3G3QxwA sustainable and far more durable alternative to the well-known nylon cheesecloth is now available for the Melitherm AR.Due to its material the new stainless steel fine strainer with a mesh width of 0.30 mm contributes to an optimal heat distribution on the bottom and thus allows the honey crystals to melt much faster, which makes the process more efficient. An additional plus is the uncomplicated and fast cleaning of the strainer. • suitable for container inner Ø 30 cm• THE alternative to the Melitherm nylon cheesecloth! • The strainer is placed inside the Melitherm instead of the cheesecloth.• Suitable for Melitherm AR (item: 5390239) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 30 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).THE alternative for the Melitherm nylon cheesecloth!The strainer is placed in the Melitherm above the strainer bottom instead of the cheesecloth.• Suitable for Melitherm tanks (item: 5390239)• Optimal heat distribution at the bottom• Reusable• Hygienic and easy to cleanMaterial: Stainless steel with extra-fine sieve fabric (mesh size 0.30 mm)Sieve diameter: approx. 30 cmWith sealing ring as a circumferential seal to the container wall (included in delivery).
5000163
CFM-Conical fine strainer for 32 kg tank
Stainless steel.Large straining surface ensures no blocking of the strainer. High walls allow wax particles to rise to the top. The combination of strainer and tank 5009164/5099164 (32 kg tank) is ideal for a permanent straining process.• Mesh size 0.5mm• Height: 28.5 cm• Top Ø: 30 cm (without handles)• Bottom Ø: 17.6 cmNOTE:If the conical strainer is inserted in the tank, it cannot be closed! The lid can only be placed loosely on top.If you want to close the tank properly again, the conical strainer MUST be removed!
5009156
CFM-Coarse strainer Ø 22 cm
Solid coarse strainer made of stainless steel.Ø approx. 22 cm, mesh size 1.5 mmAdditional equipment - please purchase separately:item no. 5000153 support for coarse strainer
Tip
5300156
CFM-Double strainer Ø 22 cm
CFM-Double strainer with adjustable support. Made of stainless steel.Mesh size:• fine 0.5 mm• coarse 1.5 mm
5008139
sealing ring for steel strainer and inner ring Melitherm® AR
Replacement sealing ring for steel strainer extra fine (no. 5000155) and inner ring (no. 47100004) suitable Melitherm® AR (no. 5390239).
5000162
CFM-Conical fine strainer for 50 kg tank, fits into no. 5300164 or 5390164
Stainless steel.Large straining surface ensures no blocking of the strainer. High walls allow wax particles to rise to the top. The strainer fits all our 50 kg tanks with a second valve at the top. • Mesh size 0.5mm• Height: 60 cm• Top Ø: 30 cm (without handles)• Bottom Ø: 18.6 cmNOTE:If the conical strainer is inserted in the tank, it cannot be closed! The lid can only be placed loosely on top.If you want to close the tank properly again, the conical strainer MUST be removed!
5000153
CFM-Support for strainer of Ø 22 cm
Support made of stainless steel for coarse strainer Ø 22 cm.So you can use the coarse strainer separately, for example for heather or melezitose honey.Additional equipment - please purchase separately:item no. 5009156 Coarse strainer Ø 22 cm
6000140
Conical nylon strainer, fine, Ø 32 cm, length approx. 45 cm
suitable for all common honey tanks 25-50 kg
5002155
CFM-Stainless steel strainer for Melitherm Profi, extra fine with silicon seal
• Suitable for tank inner Ø 48 cm• THE alternative to the Melitherm Profi strainer bag! • The strainer is placed inside the Melitherm Profi instead of the strainer bag.• Suitable for Melitherm Profi (item: 5302390) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 48 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).
5000143
CFM-Support cone, for conical nylon strainer Ø 32 cm, stainless steel
to use with coiled heater - prevents strainer heat damage
6099140
Conical nylon strainer, fine, Ø 45 cm, extra long version (approx. 70 cm)
Ideal combination with nylon strainer round no. 6099141Length: approx. 70 cm
5300148
CFM-Double strainer fits tanks 25-50 kg
CFM-Double strainer made of stainless steel.Fits exactly into CFM-Filling tanks from 25 - 50 kg - no support needed!Ø 30,5 cm, Mesh size coarse 1.5 mm and fine 0.5 mm
6000142
Tripod stand for conical or round nylon strainer Ø 32 cm,
fits all common buckets and honey tanks up to 50 kg
5003155
CFM-Stainless steel strainer for Megatherma, extra fine with silicon seal
• Suitable for tank inner Ø 55 cm• THE alternative to the Megatherma strainer bag! • The strainer is placed inside the Megatherma instead of the strainer bag.• Suitable for Megatherma (item: 5323900) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 55 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).
5300160
CFM-Conical double strainer Ø 22 cm
CFM-Conical double strainer with adjustable support. Made of stainless steel.Mesh size:• fine 0.5 mm• coarse 1.5 mm
5009148
CFM-Coarse strainer Ø 30 cm
CFM-Coarse strainer made of stainless steel.Ø approx. 30 cm, mesh size 1.5 mmAdditional equipment - please purchase separately:item no. 5000147 support for coarse strainer
5009174
CFM-Pre-strainer with bottom heating and DN 50 disc valve
With bottom heating. To place directly under the tap of your honey extractor.Details:• Inner tank Ø 55cm, welded bottom without gap• Rigid handles• Tank bottom with slope to the outlet• Outlet: DN50 dairy thread weldet at bottom level with screwed on DN 50 disk valve• To connect to tube connection (item number 49000040 - not included)• Sieve insert can be taken out• Material: Stainless steel• Bottom heating 1000 W / 230 V, control with a thermostat from 0 - 85°C• Height: 35 cm• Weight: XX kg• Our recommendation for 50 or more bee hives*** Picture similar ***
6809140
Conical nylon strainer, xxfine, Ø 45 cm, (approx. 60 cm)
Ideal combination with nylon strainer round no. 6009141Length: approx. 60 cm
5300177
CFM-Strainer tank 125 kg
Our CFM strainer is a very effective tool if you want to sieve up to 500 kg of honey a day.First you hang the fine conical nylon strainer in the tank and secure it with the supplied clamping ring. Next, put the perforated sheet cone into the nylon strainer and hang the heating element inside. Then put the coarse round sieve on top.To process the honey, the lower tap remains initially closed, so that the honey level rises to the upper outlet tap. Set the heating element Dana api Therma II at approx. 60 - 65 ° C, so that the honey can flow through quickly. The upper tap is left open, allowing you to drain the filtered honey into hobbocks or other tanksSince the honey only comes into contact with the heating element for a short time due to the constant release, the honey does not suffer any damage.Details:• Inner tank Ø 43 cm, welded bottom without gap• Ridgid handles• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Upper outlet: Welded-on DN 50 dairy thread with 2" honey tap to screw on• Locking ring• Loose lid• Material: Stainless steel• Fine conical nylon stainer (mesh size 0.35 mm) and coarse nylon strainer (mesh size 1 mm)• Stainless steel perforated sheet cone • Dana api Therma II 1000W / 230V• Very large sieve capacity• Height: 78 cm• Weight: 17 kg• Our recommendation when you have approx. 50 hives(Picture similar)
5000147
CFM strainer support Ø 30 cm
Strainer support made of stainless steel Ø approx. 30 cm.So the coarse strainer can be used separately for example for heather honey.Please note: The strainer is not included and has to be ordered separately
6000198
Pressure honey filter DN 50, mesh size 0.4mm
The filter is used for filtering a high quantity of pre-clarified honey. In- and outlet is DN 50 dairy thread. This connection is very easy to fix and remove.Details:Mesh size: 0.4mmWire size: 0.22mmSieve opening (clear width): 0.18mmOverall length: 50cm
5088139
Dichtungsring passend für Melitherm® Profi Edelstahlsieb
Der Dichtungsring ist als Ersatz für den CFM-Edelstahlsieb extra fein (Nr. 500XXX) zu verwenden und passt zum Melitherm® Profi (Art.-Nr. 5302390).
6000161
Nylon double strainer
Ø 23.5 cm, low-cost alternative, fits 12.5 kg plastic buckets and 25 kg / 50 kg CFM stainless steel honey tanks (No. 5000176 / 5000180)
6000169
Helix scraper for honeystrainer
Watch product-video https://youtube.com/shorts/yX2GnOyORugSwienty scraper for honey strainers has been developed by beekeepers for beekeepers.
6009140
Conical nylon strainer fine (350 micron) Ø 45 cm (approx. 60 cm)
ideal combination with nylon strainer round no. 6009141
5000157
CFM adapter lid for CFM double strainer No. 5300148 or for nylon conical strainer No. 6000140
Stainless steel for CFM double strainer No. 5300148 or for nylon conical strainer No. 6000140. The lid fits to all tanks up to inner Ø 55 cm.
5000174
CFM-Pre-strainer without bottom heating with DN 50 disc valve
To place directly under the tap of your honey extractor.Details:• Inner tank Ø 55cm, welded bottom without gap• Rigid handles• Tank bottom with slope to the outlet• Outlet: DN50 dairy thread weldet at bottom level with screwed on DN 50 disk valve• To connect to tube connection (item number 49000040 - not included)• Sieve insert can be taken out• Material: Stainless steel• Height: 35 cm• Weight: 14.9 kg• Our recommendation for 50 or more bee hives
5000151
CFM-Adapter lid for double strainer no. 5300152 or for nylon conical strainer no. 6099140
With the CFM Adapter lid, you can also use our CFM double sieve or nylon strainer on larger tanks.The adapter fits on tanks with a max. outside Ø up to 57.5cm.The adapter has an inner Ø of 43 cm.Suitable for the following sieves:5300152 CFM Double strainer Ø 43 cm6099140 Nylon strainer fine Ø 45 cm (approx. 70 cm long)6999140 Nylon strainer fine Ø 45 cm extra long version (approx. 90 cm long)6009140 Nylon conical strainer fine Ø 45 cm (approx. 60 cm long) 6099141 Nylon coarse strainer Ø 45 cm as conical strainer (approx. 60 cm long)6009141 Nylon coarse strainer round Ø 45 cm
5000175
CFM-Honey sump, stainless steel, capacity approx. 250 kg, 3000W/230 V
With the CFM honey sump you can clarify your honey gently and without effort. In the first step the coarse particles are filtered out in the sieve pan (made of perforated plate). The honey then continues to flow through the six baffles. • Stainless steel• Capacity: approx. 250 kg• Fits under all CFM extractors• Direct, complete and absolutely even heating of the honey • Thermostatically controllable immersion tube heater 0 - 85°C (3000 W/230 V)• Dimensions of the clarifier with 2" ball valve and DN 50 hose connection: 1300 x 820 x 320 mm • Our recommendation from approx. 50 bee colonies
6009142
Tripod stand for conical or round nylon strainer Ø 45 cm,
fits all common honey tanks from 100 - 350 kg
5.6
%
Z5000174
II. Choice CFM-Pre-strainer without bottom Heating with DN 50 disc valve
*** Special price II. choice with small flaws - works perfectly ***To place directly under the tap of your honey extractor.Details:• Inner tank Ø 55cm, welded bottom without gap• Rigid handles• Tank bottom with slope to the outlet• Outlet: DN50 dairy thread weldet at bottom level with screwed on DN 50 disk valve• To connect to tube connection (item number 49000040 - not included)• Sieve insert can be taken out• Material: Stainless steel• Height: 35 cm• Weight: 14.9 kg• Our recommendation for 50 or more bee hives
5009143
CFM-Support cone, for nylon strainer Ø 45 cm, stainless steel
to use with coiled heater - prevents strainer heat damage
6099141
Conical nylon strainer coarse (1000 micron) Ø 45 cm, approx. 60 cm
Fits into conical nylon strainer no. 6099140, length approx. 60 cm
5300152
CFM-Double strainer Ø 43 cm
CFM-Double strainer made of stainless steel.Fits exactly into CFM-Filling tank 100 kg - no support needed!Ø 43 cm, Mesh size coarse 1.5 mm and fine 0.5 mm
6899140
Conical nylon strainer xxfine (200 Mikron Ø45cm (app. 70 cm long)
Foodgrade conical nylon strainer xxfine (200 Mikron Ø45cm (app. 70 cm long).Ideal in combination with Nylon strainer round, coarse, Ø 45 cm Nr. 6009141