Support for uncapping machine no. 5130000 for putting on top of melter no. 6000128

Fits uncapping machine no. 5130000, together with support no. 5130010 and hopper no. 6000129 or with WT1 (no. 6000126). The wax melter is a clarifying tank with two temperature zones which basically liquefies the floating wax and derives it continuously when a certain amount has been reached. Working principle: Due to its higher density compared to the wax the honey included in the uncapping wax sinks quickly to the bottom and drains through a special pipe at the bottom. Its temperature approximately 35°C. Advantage of the system: The end products are clean uncapping wax in block form and clear honey. Both products are continuously recovered at once with very low energy input and without any loss. The gained honey is physiologically as well as regarding its taste impeccable. Weight: 105 kg Chargeable weight: 130 kg

Note: Please let us know your used frame size when ordering, so that we can pre-set the machine perfectly for you!   Capacity up to approx. 200 honeycombs in one hour. Drive motors 2 x 180 W / 230 V and a geared motor 120 W / 230 V.The machine is used for a quick uncapping of honeycombs on both sides simultaneously. It is to be used for all common frame dimensions.160 knives per side.The depth of discovery is freely adjustable from 22 - 45 mm. The machine is factory set to 24 mm honeycomb thickness.The flying suspended beater knives are designed so that they knock off wax parts, harder materials such as wooden frames and spacers, no matter what kind will not be damaged. An accident risk is thereby completely switched off by the splash cover. All parts of the device are protected against corrosion and made of stainless steel.Dimensions: (HxWxD) about 191 x 73 x 51 cmWeight: approx. 70 kgDo you need spare parts for this machine?Talk to us, we can offer you a variety of spare parts for our CFM devices / machines!