Beehives

The muzzle prevents the hornets from directly approaching the flight hole. Most bees are attacked by the hornets at the flight hole, making them easy victims. Experience shows that the hornet has to sit down first after passing through the muzzle before it can enter. Behind the grid, the bees can get to the flight hole from above. We recommend additional protection of entrance.The muzzle is plugged in at the openings for the alighting board and should stay inserted from end of August until middle/end of November (depending on the weather).It is essential that the Varroa slider remains inserted, so that the hornets do not disturb the colony from below.The entrance block inserted from above should only be used after a few days. Once the bees get used to flying in from above, the flight hole can be narrowed with it.For optimal use, a tension strap or similar fastening material (not included) is required.Weight: 1.6 kg

Herold hive (complete) consisting of:• 1 lid• 3 supers• 1 high floor• fits Deutsch Normal (german standard) and Zander frames• measurements: 495 x 438 mm, walls 30 mm thick- Delivery without frames, without paint -Weight: approx. 22,6 kg

Use:The frame feeder has to be put with the higher side at the side of the Brood Body. The lower side has to point towards the bee company.We advise to fill the frame feeder with syrup patty.If you want to use liquid feed, you’ll have to plug the frame feeder bevor use with bee wax or TIP: the frame feeder can with its higher side also be used as a Dummy Board.Material: wallboardSize: 248 x 159 mm – capacity ca 0,5 litreWeight: 1,1 kg+++ This product is not free of delivery costs.+++

The Mini Plus lift is provided with an aluminium rail and can implement6 Mini Plus frames.Material: spruceSize: 275 x 275 mmWeight: 500 g+++ This product is not free of delivery costs.+++

Consists:• 1 cover• 1 lift• 6 wood frames• 1 FloorWeight: 1,5 kg+++ This product is not free of delivery costs. +++

Dadant hive (complete) consisting of:• 1 outside lid• 1 inside lid• 1 insulation board• 1 brood super• 2 honey supers• 1 floor with perforated metal plate in aluminium• 1 entrance block• 1 insert for varroa screening• 1 queen excluder- Delivery without frames, without paint -Weight: approx. 20,9 kg

The Nicot NCC feeder is suitable for both solid and liquid feeding, as well as for feeding two colonies in a hive. The central ascent provides a clear view of the colony's strength. Additionally, a queen cell or a queen in a cage can be introduced through this opening without having to open the hive. The capacity of the two feeding trays is 3.5 liters each. The smooth, pore-free surface makes cleaning easier.Includes:1 Nicot Feeder NCC2 Closure Plugs4 Inlet ReductionsWooden frame suitable for our Herold hiveMaterial: Food-safe, recyclable plastic, spruce woodWeight: 2.4 kg

The inner cover is made of a 6 mm thick waterproof glued plywood board and is provided with a wooden frame. There are 2 small bee escapes (Ø 115 mm) incorporated. These allow the convenient removal of the largely bee-free honeycombs for honey harvesting. In addition, 2 blind lids are included. They can be inserted into the cut-outs after the honey harvest to use the inner lid as usual.Material: spruce wood / plywood board B-quality (may have minor material defects - this does not affect functionality)Bee escapes: Plastic; Dimensions Ø 115 mmDimensions inner cover: 420 x 520 mmWeight: 1. 3 kg

The metalcover is put directly over the inner lid and serves as weather protection. This cover is galvanized and spot welded at the corners.Please note that this cover does not fit over the outer wooden cover and is not suitable for treatment with formic acid.Material: galvanized sheet metalDimensions: (inside) 435 x 530 mm, Height 100 mmWeight: 1.6 kg

Weight: 1,1 kg+++ This product is not free of delivery costs. +++

Stainless steel, price per piece

In the MINI-PLUS hive bee queens can emerge and can be copulated and hibernated. The hibernated branches have to be on 2 up to 4 lifts and should be well ventilated.Lift: 6 frames ¼ Dadant (218 x 160 mm, top 252 mm)Weight: 530 g+++ This product is not free of delivery costs. +++

The feeder has a rise in the middle. The shipment also contains a bubble cap to bare the rise.TIP: You have to plug up the supper bevor you use liquid bee feed. We advise bee wax or synthetic resin.Capacity: ca. 10 kg (ca. 7l)Weight: 2,6 kg+++ This product is not free of delivery costs. +++

Material: spruce woodWeight: 0.1 kg

Material: EdelstahlWandstärke der Beute: max. 26 mmKapazität: bis zu 3 RähmchenGefertigt aus Ø 8 mm Edelstahldraht, mit angeschweißten Edelstahllaschen

The feeder has a rise in the middle. The shipment also contains a bubble cap to bare the rise.TIP: You have to plug up the supper bevor you use liquid bee feed. We advise bee wax orMaterial: spruce / plywood panel waterproof glued laminated B-product (it can feature small material mistakes – they don’t affect the effectivity of the article)Weight: 1,4 kg+++ This product is not free of delivery costs.+++

The floor has a mesh screen and an entrance block.Material: spruceWeight: 730 g+++ This product is not free of delivery costs.+++

The inside cover is made of 6 mm waterproof glued laminated ply wood board and has a wood frame. For isolation we advise our insulation board.Material: spruce / plywood panel B-product (it can feature small material mistakes – they don’t affect the effectivity of the article)Weight: 230 g+++ This product is not free of delivery costs. +++

The floor is equipped with stainless steel expanded metal, which ensures good air circulation as well as reliable varroa control (floor insert not included!).Material: spruce woodWeight: 3.8 kg

External dimensions 500 x 500 mm, wall thickness 50 mm, height 250 mm. For 11 DNM frames (top beam 395 mm, frame 370 x 223 mm). Support only on the outer edge of the groove, making it possible to lay queen excluder (435 x 435 mm) on top without resting on the frames. Four large handle recesses ensure easy handling of the Segeberger super. Two rails are required per Segeberger super; please order separately. Weight: 2.2 kg

The insulation board made of cellulose fits into the inside cover. It serves as isolation against strong solar irradiation in summer and against cold.Material: celluloseWeight: 220 g+++ This product is not free of delivery costs. +++

Weight: 1,2 kg+++ This product is not free of delivery costs. +++

The board has very high isolation characteristics and is also used to restrict the bee company inside the Brood Body.• Material: spruce wood, high-density expanded polystyrene• Dimensions: 248 × 159 mm, thickness 25 mm• Weight: 100 g

Koralan water-based lacquer.For surface sealing of feeder super and frame feeder made of wood. Properties • water-based • colorlessly • easy to spread, good flow properties • low odour, odourless after drying • quick-drying • highly transparent, silky glossy Container size: 750 ml

Weight: 0,4 kg+++ This product is not free of delivery costs. +++

With plastic floor slide for Herold high floorWeight: 1,3 kg+++ This product is not free of delivery costs. +++

The Zander-Dadant Brood body has aluminium rails and space for 10 frames.2 rails at the bottom of the body give stability and make sure that it will not slip-off.The corner joints of the frame are in groove and spring, glued and screwed.Material: Weymouth pineMeasurements: 420 x 520 mm, Height 295 mmWeight: 4.6 kg

The standard super has aluminium rails and space for 10 frames.2 rails at the bottom of the super give stability and make sure that it will not slip-off.The corner joints of the frame are in groove and spring, glued and screwed.Material: Weymouth pineMeasurements: 420 x 520 mm, Height 229 mmWeight: 4.2 kg

Weight: 1,7 kg+++ This product is not free of delivery costs. +++

Koralan® Hive Oil – Natural Protection for Long-Lasting BeehivesContainer size: 750 ml | Color: Swedish RedKoralan® Hive Oil is a high-quality wood care oil based on natural oils and water, designed for the refinement and sustainable protection of wooden surfaces in beekeeping.Its special formula with protective waxes creates a durable, water-repellent surface and provides reliable UV protection. This keeps the wood looking beautiful and optimally protected for longer – in all weather conditions.• Area of ApplicationFor surface finishing and decorative design of wooden surfacesfor outdoor use without ground contact. Suitable for wooden beehives and hive components, bee houses, and other wooden structures used in beekeeping.• PropertiesTested for bee compatibilitySafe for toys according to DIN EN 71-3UV protectionWater-repellentAwarded in accordance with the criteria of the German environmental label “Blue Angel” (DE-UZ 12a).This makes the oil not only effective, but also environmentally responsible and safe for bees.• DryingUnder standard climate conditions (23 °C, 50% relative humidity according to DIN 50014) on common wood types such as pine and spruce:Dust-dry: after approx. 3 hours - Recoatable / Sandable: after approx. 8–10 hours• Application MethodBrushing, rolling• Ingredients according to VdL-RL 01Alkyd resin, pigments, defoamers, wetting agents, thickeners, siccatives, BIT (benzisothiazolinone), CMIT/MIT (chloromethylisothiazolinone/methylisothiazolinone) (3:1).Manufacturer / Photo credits:Kurt Obermeier GmbHBerghäuser Straße 70D-57319 Bad Berleburg

Capacity: 10 liters, with aluminum perforated angle

Weight: 1,6 kg+++ This product is not free of delivery costs. +++

The Zander- Dadant brood super can be implemented with 10 combs Zander-Dadant.The corners of the super are glued and bolted.Material: spruceSize: 495 x 438 mm, wall thickness 30 mmWeight: 3 kg+++ This product is not free of delivery costs.+++

The herold flat floor has a mesh screen, which ensures a good ventilation as well as a reliable varroa control. Furthermore, the floor commands a tray for the varroa control as well as a entrance block.Material: spruceWeight: 3,5 kg+++ This product is not free of delivery costs. +++

Zander Liebig Beute (complete) consists of:• Metal cover • Inner coverl • Insulation board• 3 x Zander Liebig Standard super 229 mm high • Floor with Stainless steel exxpanded metal• Floor insert for varroa control• Entrance block - turnable• Material: Spruce wood, Super: Weymouth pine• Measurements: 420 x 520 mm, 20 mm thick• Weight: 20.4 kg- Frames not included, not painted, suitable for 10 Zander framesChargable weight: 25 kg

Weight: 500 g+++ This product is not free of delivery costs.+++

Hive protecting glaze from „farbnatur“ is a wax glaze which is specialised for the treatment on hives or bee houses and wood parts in the apiary.Content: 750 mlColour: walnut

The board has very high isolation characteristics and is also used to restrict the bee company inside the Brood Body.• Material: spruce wood, high-density expanded polystyrene• Dimensions: 394 × 223 mm, thickness 25 mm• Weight: 210 g

Nuc box Dadant modified – for 6 framesThe set contains:• Floor, floor slide, entrance block• Alighting board• Feeder• Inside cover• Insulating board• Outside cover made of woodMaterial: spruce woodSize: 274 x 509 mm, 22 mm Weight: 6 kg+++ This product is not free of forwarding costs.+++

• Frame edition made of VA• For 10 Zander frames with 477 x 159 mm• Coined number block to markCompatible with Liebig wood hivesWeight: 3,6 kg+++ This product is not free of delivery costs.+++

The shallow super can be implemented with 12 combs DN or 10 combs Zander with a height of 159 mm. It is provided with an aluminium rail for the Zander frames respectively wood rail for the DN frames.The corners of the super are glued and bolted.Material: spruceSize: 495 x 438 mm, wall thickness 30 mmWeight: 2,7 kg+++ This product is not free of delivery costs. +++

Nuc box DN /Zander for 5 frames German Standard or ZanderDetails:• Closable entrance hole and bunghole in the lid• If you use it for German Standard there is still space for feedingMaterial: wood with hardboard lidSize: 560 x 250 mm, height 320 mmWeight: 5,2 kg+++ This product is not free of forwarding costs.+++

The board has very high isolation characteristics and is also used to restrict the bee company inside the Brood Body.• Material: spruce wood, high-density expanded polystyrene• Dimensions: 477 × 220 mm, thickness 25 mm• Weight: 260 g

Weight: 5,6 kg+++ This product is not free of delivery costs. +++

The board has very high isolation characteristics and is also used to restrict the bee company inside the Brood Body.• Material: spruce wood, high-density expanded polystyrene• Dimensions: 470 × 300 mm, thickness 25 mm• Weight: g

In the MINI-PLUS hive bee queens can emerge and can be copulated and hibernated. The hibernated branches have to be on 2 up to 4 lifts and should be well ventilated.outside size of the cover: 300 x 300 x 40 mmWeight: 280 g+++ This product is not free of delivery costs. +++