Bottom heating 1000 W / 230 V (Ø 63 cm) for top drive

The beginner model of our CFM-Euro-Self-turning extractors. With this honey extractor the annoying manual turning of the frames is omitted. The frame basket is made of wire mesh bars and a turning device. With an inner tank Ø of just 63 cm, this self-turning extractors is one of our narrowest models. The left and right turn can easily be adjusted with a lever. Of course this extractor is also equipped with a security device.Suitable for:• 4 deep frames up to 23 cm side bar length • Frame sizes: Zander, German Standard, LangstrothTechnical details:• Top drive with security switch• Motor power 110 W / 230 V• Left and right turn• Hinged acrylic glass lid halves• Inner tank Ø 63 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Frame pockets made of wire mesh bars 24 cm x 41 cm• Material: Edelstahl-Rostfrei• Total height: 124 cm• Distance from floor to the tap 38 cmIncluded in the delivery:1 pack with one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: 44 kg / 66 kgWrapping: cardboard boxChargeable weight: 66 kg Spare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingAcrylic glass lid half on request

The allrounder of the CFM-Honey extractors with our "Extractor Witch".This tangential extractor with motor is even suitable for large frames like Dadant and German Standard 1 1/2. The cage is without middle axis so the frames can be turned inside the cage.This extractor is equipped with a honey tap, has two practical handles at the tank and is suitable for a lot of the common frame sizesFor cleaning just loosen the two screws of the traverse and take off the drive incl. the lids.Suitable for:• 4 deep deep frames up to 31cm side bar length or 8 shallow frames up to 15 cm side bar length • Frame sizes: Zander, German Standard, Langstroth, Zander-Dadant, Freudenstein, Gerstung, Kuntzsch, Dadant, German Standard 1 1/2 and Swiss framesTechnical details:• Top drive with security switch• Motor power 110 W / 230 V• Hinged acrylic glass lid halves• Inner tank Ø 63 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Grid area of the cage 38 x 46 cm• Without middle axis (frames can be turned inside the cage)• Material: Edelstahl-Rostfrei• Loading height: 100 cm• Distance from floor to the tap 38 cm• Can be modified to extract radial with a radial cageIncluded in the delivery:1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: 34 kg / 40 kgWrapping: cardboard boxChargeable weight: 46 kg Spare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingItem no. 5003840 4 frames tangential cageItem no. 5203818 18 shallow frames radial cageAcrylic glass lid half on request

The beginner model of our CFM-Euro-Self-turning extractors with "Whispering Witch". With this honey extractor the annoying manual turning of the frames is omitted. The frame basket is made of wire mesh bars and a turning device. With an inner tank Ø of just 63 cm, this self-turning extractors is one of our narrowest models.Why "Whispering Witch"? Because this drive is amazingly quiet even at full speed. In addition to the superb quietness of the drive, the comfortable operation is also a major advantage. With a rotary knob you have everything under control – can it be easier?Of course this extractor is also equipped with a security device.Suitable for:• 4 deep frames up to 23 cm side bar length • Frame sizes: Zander, German Standard, Langstroth• Direct drive with security switch• Motor power 40 W / 230 V• Very quiet drive even at full speed• Speed control 80 - 350 rpm• Hinged acrylic glass lid halves• Inner tank Ø 63 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Frame pockets made of wire mesh bars 24 cm x 41 cm• Material: Edelstahl-Rostfrei• Loading height: 100 cm• Total height: 130 cm• Distance from floor to the tap 38 cmIncluded in the delivery:1 pack with one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: 66 kg / 43 kgWrapping: cardboard boxChargeable weight: 66 kgSpare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingAcrylic glass lid half on request

The basic model of our CFM-Honey radial extractors with "Whispering Witch".Why "Whispering"? Because this drive is amazingly quiet even at full speed. In addition to the superb quietness of the drive, the comfortable operation is also a major advantage. With a rotary knob you have everything under control – can it be easier?This extractor is equipped with a honey tap and has two practical handles at the tank.For cleaning just loosen the two screws of the traverse and take off the drive incl. the lids.Suitable for:• 18 shallow frames up to 16 cm side bar length and 42 mm side bar width • Frame sizes: Dadant shallow frames, Zander shallow frames, German Standard shallow frames, Langstroth shallow frames• Direct drive with security switch• Motor power 40 W / 230 V• Very quiet drive even at full speed• Speed control 80 - 350 rpm• Hinged acrylic glass lid halves• Inner tank Ø 63 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Radial cage for 18 shallow frames• Material: Edelstahl-Rostfrei• Loading height: 100 cm• Total height: 115 cm• Distance from floor to the tap 38 cm• Can be modified to extract tangentialIncluded in the delivery:1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: XX kg / XX kgWrapping: cardboard boxSpare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingItem no. 5203712 12 frames radial cageItem no. 5303818 3 gridsItem no. 5003840 4 frames tangential cage 38 x 46cmAcrylic glass lid half on request

This CFM-Euro-Self-turning extractor is suitable for 4 frames Zander, German Standard or Langstroth. With an inner tank Ø of just 63 cm, this self-turning extractors is one of our narrowest models.The low-noise top drive gear motor offers you the possibility to switch from right to left (or vice versa) via a tilt switch. As soon as you change the direction with the switch, the drive automatically stops and then starts again in the other direction. The rotary knob can be steplessly adjusted. The honey extractor is also equipped with a safety device so that the lid cannot be opened during the extraction process. This mechanism is only released when the basket comes to a complete stop.Suitable for:• 4 deep frames up to 23 cm side bar length • Frame sizes: Zander, German Standard, LangstrothTechnical details:• Security device with lid lock• Flat gear motor 270 W / 230 V• Left / right turn• Speed continously adjustable• Hinged acrylic glass lid halves• Inner tank Ø 63 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Frame pockets made of wire mesh bars 24 cm x 41 cm• Material: Edelstahl-Rostfrei• Total height: 126 cm• Distance from floor to the tap 38 cmIncluded in the delivery:1 pack with one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: 45 kg / 65 kgWrapping: cardboard boxChargeable weight: 65 kg Spare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingAcrylic glass lid half on request

Our Radial extractor especially for SWISS frames with adjusted cage height.The extractors is equipped with our new "Whispering Witch".Why "Whispering"? Because this drive is amazingly quiet even at full speed. In addition to the superb quietness of the drive, the comfortable operation is also a major advantage. With a rotary knob you have everything under control – can it be easier?This extractor is equipped with a honey tap and has two practical handles at the tank.For cleaning just loosen the two screws of the traverse and take off the drive incl. the lids.Suitable for:• 12 shallow frames up to 17.5 cm side bar length and 40 mm side bar width • Frame sizes: low cage version especially made for SWISS frames• Direct drive with security switch• Motor power 40 W / 230 V• Very quiet drive even at full speed• Speed control 80 - 350 rpm• Hinged acrylic glass lid halves• Inner tank Ø 63 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Radial cage for 12 SWISS frames• Material: Edelstahl-Rostfrei• Loading height: 100 cm• Total height: 115 cm• Distance from floor to the tap 38 cm• Can be modified to extract tangentialIncluded in the delivery:1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: approx. 50 kg / approx. 40 kgWrapping: cardboard boxChargeable weight: 50 kgSpare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingItem no. 5203712-CH 12 SWISS frames radial cageItem no. XXX 3 gridsItem no. 5003840 4 frames tangential cage 38 x 46cmAcrylic glass lid half on request

The basic model of our radial extractors with motor. The extractor has a honey tap and practical handles at the tank.For cleaning just open the wing nuts at the cross-beam and take off the complete drive including the lids.Suitable for:• 18 shallow frames (side bar up to 16 cm and side bar width 42 mm)• Frame sizes: Dadant super, Zander half and super, German Standard half and super, Langstroth half and super frames Technical details:• Top drive with safety device• Motor 110 W / 230 V• Hinged acrylic glass lid halfs• Inner tank Ø 63 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Radial cage for 18 shallow frames• Material: Stainless Steel• Loading height: 100 cm• Total height: 111 cm• Distance from the floor to the honey tap: 38 cm• Conversion into tangential extractor possibleIncluded in the delivery:1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: approx. 50 kg / approx. 40 kgWrapping: cardboard boxChargeable weight: 50 kgSpare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingItem no. 5203818 Radial cage for 18 shallow framesItem no. 5303818 Grids to insert into the cage Item no. 5003840 4-Frames tangential cageAcrylic glass lid half on request

The allrounder of the CFM-Honey extractors with our new direct drive "Whispering Witch". Why "Whispering"? Because this drive is amazingly quiet even at full speed. In addition to the superb quietness of the drive, the comfortable operation is also a major advantage. With a rotary knob you have everything under control – can it be easier?This tangential extractor with motor is even suitable for large frames like Dadant or German Standard 1 1/2. The cage is without middle axis so you can turn the frames inside the cage. This extractor is equipped with a honey tap, has two practical handles at the tank and is suitable for a lot of the common frame sizes.For cleaning just loosen the two screws of the traverse and take off the drive incl. the lids.Suitable for:• 4 deep deep frames up to 37cm side bar length or 8 shallow frames up to 18 cm side bar length • Frame sizes: Zander, German Standard, Langstroth, Zander-Dadant, Freudenstein, Gerstung, Kuntzsch, Dadant, German Standard 1 1/2, Swiss framesTechnical details:• Direct drive with security switch• Motor power 40 W / 230 V• Very quiet drive even at full speed• Speed control 80 - 350 rpm• Hinged acrylic glass lid halves• Inner tank Ø 63 cm, welded bottom without gap• Tank bottom with slope to the outlet• Outlet: 1 1/2" honey tap, welded at bottom level• Handles at the lower end of the tank• Grid area of the cage 38 x 46 cm• Without middle axis (frames can be turned inside the cage)• Material: Edelstahl-Rostfrei• Loading height: 100 cm• Distance from floor to the tap 38 cmIncluded in the delivery:1 pack with hexagonal screws and nuts for the feet, one socket wrench no. 13 and a yellow sealant for the bottom bearing.Weight with/without wrapping: 34 kg / 40 kgWrapping: cardboard boxChargeable weight: 46 kg Spare parts and accessories:Item no. 6000070 Ball for bearingItem no. 6300061 Rubber feetItem no. 6000074 Food lubricant grease for bottom bearing 20 gItem no. 23045007 Sealant for bottom bearingItem no. 5003840 4 frames tangential cageItem no. 5203818 18 shallow frames radial cageAcrylic glass lid half on request