Honey processing
After the honey is harvested you can help the honey to a fine creamy consistency by stirring. There is also the choice between simple manual honey creamers which are used by hand or the honey creamers and mixers which do the stirring intervals without much effort by time control. Our CFM honey creamers are designed to stir without air inclusions and guarantee even mixing at low filling levels.
The acrylic lid for Melitherm® AR is used to cover the Melitherm tank with a recess for the heating element.
fits all common buckets and honey tanks up to 50 kg
Union nut hexagon 1 1/2", fits for example Swienty filling machineWeight: 0,2kgChargeable weight: 0,2kg
A must-have during honey harvesting – the CFM coarse strainer with three permanently attached support brackets.Practical for containers from approx. 26 cm up to a maximum diameter of 30 cm.Mesh size:• Coarse strainer: 1.66 mmMaterial: Stainless steel
*Optimized version since autom 2020From now on, the edges of the CFM spacer ring is smooth and without holes. Thus, there is no longer a cut hole, which interfers with cleaning with a cloth or sponge.Height 6 cm, Ø ring outside at the top 30.4 cmØ ring inside at the bottom 30.7 cmMade from perforated sheet metal stainless steel. To be placed between the Melitherm no. 5900239 and the CFM-Honey tank (with inner Ø approx. 30.7 cm) underneath to allow water condensation to escape during the straining procedure.
CFM-Double strainer with adjustable support. Made of stainless steel.Mesh size:• fine 0.5 mm• coarse 1.5 mm
Rückschlagventil für Dana api Matic inklusive Silikonschließer.Das Rückschlagventil verhindert das Eindringen von Luft beim Rücklauf.
ideal combination with nylon strainer round no. 6009141
fits all common honey tanks from 100 - 350 kg
This stainless steel ring is attached to the top of the 100 kg double-walled creamer to bridge the bolts for securing the traverse and ensure that the funnel lies flat
Ideal combination with nylon strainer round no. 6009141Length: approx. 60 cm
Ideal combination with nylon strainer round no. 6099141Length: approx. 70 cm
to use with coiled heater - prevents strainer heat damage
Fits into conical nylon strainer no. 6099140, length approx. 60 cm
CFM-Coarse strainer made of stainless steel.Ø approx. 30 cm, mesh size 1.5 mmAdditional equipment - please purchase separately:item no. 5000147 support for coarse strainer
Foodgrade conical nylon strainer xxfine (200 Mikron Ø45cm (app. 70 cm long).Ideal in combination with Nylon strainer round, coarse, Ø 45 cm Nr. 6009141
now you can stir the honey on several levels at once! Just slide the propellers over the hexagon rod and pull the screws tight. This way you can easily process more honey in less time.
Our CFM honey creamer UP & DOWN has been the bestseller for manual creamers for years!Here you achieve a creamy honey by evenly moving up and down (stomping). To ensure that no air is incorporated, never lift the stirrer completely out of the honey. The NEW version does not need a ring any more due to the newest laser technology in the production. The edges are deburred/de-sharpened in such a way that no scraping occurs with plastic containers.• super-stable and durable design• stainless steel• total length approx. 61 cmOur tip: Stamp the honey for approx. 2 - 3 minutes per stirring unit.
A little helper you don't want to miss when emptying your honey tanks and buckets. Easy to ajdust with the roller underneath and the recessed grip. Measurements• Height 16.5 to 27.5 cm (adjustable) • Area of the feet 4,5 x 4,5 cm • Stand area for containers 36,5 x 36,5 cm • Material: Linden wood Weight: 2.5 kg
• With two fixed, rounded blades, which work opposite• Very good stirring effect• Length: 59 cm• Blade: Ø 10 cm• Round bar: Ø 12 mm with triangular holder for common drilling machine chuckMADE IN GERMANY
CFM-Conical double strainer with adjustable support. Made of stainless steel.Mesh size:• fine 0.5 mm• coarse 1.5 mm
fits into conical nylon strainer no. 6009140
Total length 170 cmLength of the brush 16 cm
Click here for the product video --> https://www.youtube.com/shorts/SH5vL3G3QxwA sustainable and far more durable alternative to the well-known nylon cheesecloth is now available for the Melitherm AR.Due to its material the new stainless steel fine strainer with a mesh width of 0.30 mm contributes to an optimal heat distribution on the bottom and thus allows the honey crystals to melt much faster, which makes the process more efficient. An additional plus is the uncomplicated and fast cleaning of the strainer. • suitable for container inner Ø 30 cm• THE alternative to the Melitherm nylon cheesecloth! • The strainer is placed inside the Melitherm instead of the cheesecloth.• Suitable for Melitherm AR (item: 5390239) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 30 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).THE alternative for the Melitherm nylon cheesecloth!The strainer is placed in the Melitherm above the strainer bottom instead of the cheesecloth.• Suitable for Melitherm tanks (item: 5390239)• Optimal heat distribution at the bottom• Reusable• Hygienic and easy to cleanMaterial: Stainless steel with extra-fine sieve fabric (mesh size 0.30 mm)Sieve diameter: approx. 30 cmWith sealing ring as a circumferential seal to the container wall (included in delivery).
• With two fixed, rounded blades, which work opposite• Additional protection of the stirring blades on the outside by stainless steel rings• Very good stirring effect• Length: 59 cm• Blade: Ø 10 cm• Round bar: Ø 12 mm with triangular holder for common drilling machine chuckMADE IN GERMANY
Honey shelf, table modelMade of wood. Suitable for 25 honey jars 500g
An indispensable helper during honey harvesting – the CFM double strainer with extendable support brackets.The fine strainer features a strong conical recess (lower curvature) as well as an additional circumferential filter surface around the sides.Practical for containers with a maximum diameter of 40 cm.Mesh sizes:• Coarse strainer: 1.66 mm• Fine strainer: 0.71 mmMaterial: Stainless steel
to use with coiled heater - prevents strainer heat damage
1 Set of acrylic glas lids (set of 2) for CFM-Giga Therma by Geller to cover the Giga Therma. Both lids have hole for the honey melter
Multiple reusable strainer bag suitable for Dana api Megatherma item no. 5323900.
The new CFM bucket holder/support is an extremely practical aid for transferring larger containers (buckets, storage containers).Extremely stable design, which can be adapted to any container edge and even loaded with a 40 kg bucket. A special feature is the existing recess for container edges with a hold-up envelope.Laser-cut from 3 mm thick flat material (V2A) | Total length 40. 5 cm
Would you like to remove stored candied honey from a container for further processing?No problem with the CFM honey spade! Due to its extremely stable construction, this tool is an indispensable and long-lasting companion in your beekeeping.• made of stainless steel• very sturdy• total length approx. 62 cm
To determine the water content in honey, important for its durability and for compliance with the provisions of the Food Law. Measuring scale 13 - 25% (water content in honey directly readable).The refractometer incl. Accessories is delivered in a plastic case.Type RHN1-ATCIncluded:• Refractometer• Pipette• Calibration fluid• Calibration block• screwdriver• cloth-------------------------------------------------- ------Note on water content in honey:• Water content according to honey ordinancea) in general: max. 20%b) Honey of heather (Calluna) and honey in general: max. 23%c) Baking honey of heather (Calluna): max. 25%• Water content according to D.I.B. determinationsa) in general: max. 18%b) clover honey: max. 18%c) heather honey: max. 21.4%(Source: www.deutscherimkerbund.de, as of 19.12.2017)
Half hose coupling made of stainless steel with cone connecting piece DN 40 and locking nut DN 40 for hose-Ø 40 mm.For connecting hoses to disc valves.
Half hose coupling made of stainless steel with cone connecting piece DN 40 and locking nut DN 40 for hose-Ø 38 mm.For connecting hoses to disc valves.
Guide frame for Dana api Therma melters, stainless steel.Suitable for item number 6000237 and 6000238
CFM-Double strainer made of stainless steel.Fits exactly into CFM-Filling tanks from 25 - 50 kg - no support needed!Ø 30,5 cm, Mesh size coarse 1.5 mm and fine 0.5 mm
With recess for the heating element. Completely made of stainless steel.
• Suitable for tank inner Ø 48 cm• THE alternative to the Melitherm Profi strainer bag! • The strainer is placed inside the Melitherm Profi instead of the strainer bag.• Suitable for Melitherm Profi (item: 5302390) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 48 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).
• Suitable for tank inner Ø 55 cm• THE alternative to the Megatherma strainer bag! • The strainer is placed inside the Megatherma instead of the strainer bag.• Suitable for Megatherma (item: 5323900) • Optimal heat distribution on the floor• Reusable• Hygienic and easy to cleanMaterial: Stainless steel, with extra-fine mesh (mesh width 0,30 mm), strainer diameter: approx. 55 cm. Sealing ring as a circumferential seal to the container wall (included in delivery).
Made of stainless steel, can be adjusted to any angle, the base is equipped with non-slip rubber feet. Distance between tap and floor approx. 150 mm, when tilted approx. 125 mm (depending on the filling container)Load capacity up to max. 50 kgWrapped in a cardboard box with assembly and operating instructionsWeight: 3.4 kg
Half hose coupling mad of stainless steel with cone connecting piece DN 50 and locking nut DN 50 for hose-Ø 50 mm.For connecting hoses to disc valves.
Made of Stainless steel including mounting rails* Picture shows shelve including mounting rails
Half hose coupling made of stainless steel with cone connecting piece DN 50 and locking nut DN 50 for hose-Ø 40 mm.For connecting hoses to disc valves.